TASK 52-11-31-000-002
 Removal of the Stop Fittings, Buffer, Guide Fittings, Rollers, Door Stop Fittings, Roller Fittings and Guide Arm Fittings
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific non metallic scraper
 No specific access platform 3.5 m (11 ft. 6 in.)
 98D52103501000 1 BALLAST WEIGHT - PASSENGER CREW DOOR

 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004  USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
 Material No. 19-003  USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
 1EFF : ALL 1 52-11-31Page 410 1 1 May 01/98R 1 1 1CES 1

 C. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
25-23-45-000-002 Removal of the Door Frame Linings at the Right FWD Passenger/Crew Door 25-23-45-000-005 Removal of the Door Frame Linings at the Left FWD Passenger/Crew Door 25-23-46-000-001 Removal of the Door Linings at the FWD Passenger/Crew Doors R 25-62-44-000-002 Removal of the Escape-Slide Pack-Assembly 52-10-00-480-001 Installation of the Passenger/Crew Door Ballast Weight (98D52103501000) for Escape Slide 52-10-00-480-001 Installation of the Passenger/Crew Door Ballast Weight (98D52103501000) for Escape Slide/Raft 52-10-00-860-001 Special Precautions before Work on the Passenger/Crew
 Door
 52-11-12-000-003 Removal of the Guide Arms
 52-11-31-991-002 Fig. 402
 52-11-31-991-004 Fig. 403
 52-11-31-991-005 Fig. 404
 52-11-31-991-006 Fig. 405
 52-11-31-991-007 Fig. 406
 52-11-31-991-008 Fig. 407
 52-11-31-991-009 Fig. 408
 52-11-31-991-010 Fig. 409

 3. Job Set-up
__________
 Subtask 52-11-31-010-052
 A. Get Access
 WARNING : DO NOT OPEN THE PASSENGER/CREW DOOR IF THE WIND SPEED IS MORE
_______
 THAN 65 KNOTS.

 WARNING : BEFORE YOU START WORK ON THE DOOR, MAKE SURE THAT:
_______
 -
THE EMERGENCY CONTROL HANDLE IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.

 -
THE PERCUSSION LEVER OF THE DOOR-DAMPER AND EMERGENCY-OPERATION CYLINDER IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.

 1EFF : ALL 1 52-11-31Page 411 1 1 Feb 01/04 1 1 1CES 1

 WARNING : STOP THE OPENING PROCEDURE IF THE RED WARNING LIGHT FLASHES.
_______ RESIDUAL PRESSURE COULD CAUSE THE DOOR TO OPEN WITH A SUDDEN FORCE AND INJURE PERSONS AND/OR DAMAGE THE AIRCRAFT.
 (1)
 Put the access platform in front of the passenger/crew door 831(841).

 (2)
 Open the passenger/crew door 831 (841).

 (3)
 Obey the special precautions before you start work on the door (Ref. TASK 52-10-00-860-001).

 Subtask 52-11-31-865-051
 B. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU EIS/SLIDES/ARM AND WARN/FLT 15WN P11 121VU EIS/SLIDES/ARM AND WARN/GND 13WN P10 121VU EIS/SDAC1 AND 2/DOOR/DET/PAX 48WV P05
 **ON A/C 001-002,
 Subtask 52-11-31-010-053
 C. Removal of Components
 (1)
 Remove the escape slide (Ref. TASK 25-62-44-000-002).

 (2)
 Remove the door lining panels (Ref. TASK 25-23-46-000-001).

 (3)
 Remove the door frame lining panels (Ref. TASK 25-23-45-000-005) or (Ref. TASK 25-23-45-000-002).

 (4)
 Install the BALLAST WEIGHT - PASSENGER CREW DOOR (98D52103501000) (Ref. TASK 52-10-00-480-001).

 (5)
 Remove the door insulation.

 1EFF : ALL 1 52-11-31Page 412 1 1 Feb 01/04R 1 1 1CES 1

R **ON A/C 003-049, 051-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 Subtask 52-11-31-010-053-A
 C. Removal of Components
 (1)
 Remove the escape slide/raft (Ref. TASK 25-62-44-000-002).
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門2(37)