-------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
31-60-00-860-001 31-60-00-860-002 34-10-00-860-004 EIS Start ProcedureEIS Stop ProcedureIR Alignment Procedure
3. Job Set-up__________
Subtask 27-92-41-860-054
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).
(2) Do the IR alignment procedure (Ref. TASK 34-10-00-860-004).
R R (3) On the panel 23VU: - release the FLT CTL/ELAC 1 and FLT CTL/SEC 1 pushbutton switches (on these pushbutton switches, the OFF legends come on) - make sure that the FLT CTL/FAC1 is engaged (on this pushbutton switch, the OFF legends is off).
R R (4) On the panel 24VU: - release the FLT CTL/ELAC 2, FLT CTL/SEC 2 and FLT CTL/SEC 3 pushbutton switches (on these pushbutton switches, the OFF legends come on) - make sure that the FLT CTL/FAC2 is engaged (on this pushbutton switch, the OFF legend is off).
(5) Do the EIS start procedure (Ref. TASK 31-60-00-860-001).
(6) On the center pedestal, on the ECAM control panel, push the F/CTL key (on the lower ECAM display unit, the F/CTL page comes into view).
(7) On the overhead panel 50VU: - make sure that the SVCE INT OVRD pushbutton switch is released (the ON legend is off).
(8) On the overhead panel 48VU: - make sure that the AUDIO SWITCHING selector switch is at NORM.
(9) On the Audio Control Panels (ACP) on the center pedestal and on the panel 20 VU, make sure that:
-the INT/RAD switches are set to the middle position R - the legends of all the transmission pushbutton switches are off
-all the reception pushbutton switches are pushed (no reception).
(10) Pressurize the aircraft hydraulic systems (Ref. TASK 29-23-00-863-001) (Ref. TASK 29-24-00-863-001) (Ref. TASK 29-10-00-863-003).
Subtask 27-92-41-010-071
B. Get Access
(1)
Put the access platform in position at the access door 822.
(2)
Open the access door 822.
(3)
On the battery power center 105VU:
-loosen the two screws and remove the protective cover.
Subtask 27-92-41-865-061
C. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FLIGHT CONTROLS/ELAC1/NORM/SPLY 15CE1 B11 49VU FLIGHT CONTROLS/FCDC1/SPLY 20CE1 B10 49VU FLIGHT CONTROLS/SEC1/NORM/SPLY 21CE1 B08 49VU AUTO FLT/FCU/1 9CA1 B05 49VU AUTO FLT/FMGC/1 10CA1 B02 49VU CAPT/LOUD/SPKR 5WW F10 49VU COM/AUDIO/FLT/INTPH 9RN G08 49VU COM/AUDIO/ACP/F/O 5RN G07 49VU COM/AUDIO/ACP/CAPT 4RN G06 105VU FLIGHT CONTROLS/ELAC2/STBY SPLY 16CE2 A02 105VU FLT CTL/ELAC1/STBY SPLY 16CE1 A01 105VU FLT CTL/SEC1/STBY SPLY 22CE B01 121VU AUTO FLT/FCU/2 9CA2 M21 121VU AUTO FLT/FMGC/2 10CA2 M17 121VU COM NAV/ACP/THIRD/OCCPNT 6RN M02 121VU AUTO FLT/STICK/LOCK 13CA N16 121VU EIS/F/O/LOUD/SPKR 4WW P08 121VU FLIGHT CONTROLS/FCDC2/SPLY 20CE2 Q20 121VU FLIGHT CONTROLS/SEC3/SPLY 21CE3 Q19
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------121VU FLIGHT CONTROLS/SEC2/SPLY 21CE2 Q18 121VU FLIGHT CONTROLS/ELAC2/NORM/SPLY 15CE2 R20
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱9(59)
