(4)
On the center pedestal, on the ECAM control panel, push the F/CTL key (on the lower ECAM display unit, the F/CTL page comes into view).
(5)
On the overhead panel 23VU, make sure that the FLT CTL/ELAC 1 and the FLT/SEC 1 pushbutton switches are pushed (on these pushbutton switches, the FAULT and OFF legends are off).
(6)
On the overhead panel 24VU, make sure that the FLT CTL/ELAC 2, FLT CTL/SEC 2 and FLT CTL/SEC 3 pushbutton switches are pushed (on these pushbutton switches, the FAULT and OFF legends are OFF).
Subtask 27-96-00-010-051
B. Get Access
(1)
Put the access platform in position at the access door 822.
(2)
Open the access door 822.
(3)
On the battery power center 105VU:
-loosen the two screws and remove the protective cover.
1EFF : ALL 1 27-96-00Page 508 1 1 May 01/00R 1 1 1CES 1
Subtask 27-96-00-865-057
C. Make sure that this(these) circuit breaker(s) is(are) closed: -------------------------------------------------------------------------------
PANEL ------ DESIGNATION ------------------------------------------------------- IDENT. LOCATION------------------
49VU FLIGHT CONTROLS/ELAC1/NORM/SPLY 15CE1 B11
49VU FLIGHT CONTROLS/FCDC1/SPLY 20CE1 B10
49VU FLIGHT CONTROLS/SEC1/NORM/SPLY 21CE1 B08
105VU FLIGHT CONTROLS/ELAC2/STBY SPLY 16CE2 A02
105VU FLT CTL/ELAC1/STBY SPLY 16CE1 A01
105VU FLT CTL/SEC1/STBY SPLY 22CE B01
121VU FLIGHT CONTROLS/SEC3/SPLY 21CE3 Q19
121VU FLIGHT CONTROLS/SEC2/SPLY 21CE2 Q18
121VU FLIGHT CONTROLS/ELAC2/NORM/SPLY 15CE2 R20
Subtask 27-96-00-865-080
D. Open, safety and tag this(these) circuit breaker(s):
------PANEL -------------------------------------------------------DESIGNATION ------------------IDENT. LOCATION
-------------------------------------------------------------------------------121VU FLIGHT CONTROLS/FCDC2/SPLY 20CE2 Q20
1EFF : ALL 1 27-96-00Page 509 1 1 Aug 01/02R 1 1 1CES 1
4. Procedure
_________ R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-210,
Subtask 27-96-00-710-056
A. Test NOTE : During the test, the ECAM display unit shows the FAULT of the FCDC
____
1 or the FCDC 2. Ignore this indication.
(1) Do this test:
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the CAPT lateral console, on Aural announcement.
the side stick controller: On the panel 130VU:
- push the takeover and priority - the red arrow of the SIDE STICK
pushbutton switch and hold for PRIORITY/F/O annunciator comes on.
30 seconds.
- release the takeover and
priority pushbutton switch
after 30 seconds.
2. On the CAPT lateral console: On the lower ECAM display unit, on the
- move the side stick controller F/CTL page:
around its axis and then to - the symbols for the elevators and the
zero. ailerons move and then go back to
zero.
3. On the F/O lateral console: On the lower ECAM display unit, on the
- move the side stick controller F/CTL page:
around its axis and then to - the symbols for the elevators and the
zero. ailerons stay at neutral.
On the panel 131VU , on the SIDE STICK
PRIORITY/CAPT annunciator:
- the green CAPT legend comes on when
you move the F/O side stick
controller away from neutral,
- the green CAPT legend goes off when
you move the F/O side stick
controller back to neutral.
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
4. On the F/O lateral console, on the side stick controller:
-push and then release the
takeover and priority
pushbutton switch.
5. On the F/O lateral console:
-move the side stick controller around its axis and then to zero.
6. On the CAPT lateral console:
-move the side stick controller around its axis and then to zero.
7.
Close the circuit breaker 20CE2.
8.
Open the circuit breaker 20CE1.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱9(117)
