**ON A/C ALL
4. Procedure
_________ Subtask 27-96-00-710-059
A. Do this test:
CAUTION : DO NOT OPERATE THE SIDE STICKS.
_______
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1.
Push the line key adjacent to the EFCS 1(2) indication.
2.
Push the line key adjacent to the TEST indication.
3.
Push the line key adjacent to the ELEVATOR DAMPING TEST indication.
4.
On the overhead panels 23VU and 24VU:
-release the FLT CTL/ELAC 1 and FLT CTL/ELAC 2 pushbutton switches.
5.
Pressurize the Green, Blue and Yellow hydraulic systems with the electric pumps (Ref. TASK 29-23-00-863-001) (Ref. TASK 29-10-00-863-003).
6.
On the center pedestal, on the MCDU, push the line key adjacent to the START LEFT ELEV TEST indication (See NOTE).
7.
Push the line key adjacent to the RETURN indication.
The MCDU shows the EFCS1(2) page.
The MCDU shows the EFCS1(2)/TEST page.
The MCDU shows the EFCS1(2)/ELEVATORDAMPING TEST page.
On the overhead panels 23VU and 24VU:
-the OFF legends of the FLT CTL/ELAC 1and FLT CTL/ELAC 2 pushbuttonswitches come on.
On the EFCS1(2)/ELEVATOR DAMPING TESTpage, the MCDU shows:
-
the L ELEV TEST OK indication
-
the minimum value
-
the damping factors.
1EFF : ALL 1 27-96-00Page 531 1 1 Aug 01/05R 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
8.
Push the line key adjacent to the START RIGHT ELEV TEST indication (See NOTE).
9.
Push the line key adjacent to the RETURN indication.
10.
On the MCDU, push the line key adjacent to the RETURN indication until the CFDS menu page comes into view.
11.
On the overhead panels 23VU and 24VU:
-push the FLT CTL/ELAC 1 and FLT CTL/ELAC 2 pushbutton switches.
On the EFCS1(2)/ELEVATOR DAMPING TESTpage, the MCDU shows:
-
the R ELEV TEST OK indication
-
the minimum value
-
the damping factors.
The MCDU shows the MCDU MENU page.
On the overhead panels 23VU and 24VU :
-
the OFF legends of the FLT CTL/ELAC 1and FLT CTL/ELAC 2 pushbuttonswitches go off.
-
the FAULT legends of the FLT CTL/ELAC 1 and FLT CTL/ELAC 2 pushbutton switches come on then go off after not many seconds.
NOTE : If "TEST NOT POSSIBLE" is shown: (Ref. TSM 27-OBSV PB 101).
____
________
5. Close-up
Subtask 27-96-00-860-069
A. Put the aircraft back to its initial configuration.
(1)
Depressurize the Green, Blue and Yellow hydraulic systems (Ref. TASK 29-23-00-864-001) (Ref. TASK 29-10-00-864-003).
(2)
De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
Subtask 27-96-00-410-059
B. Close Access
(1)
Install the protective cover on the battery power center 105VU.
(2)
Tighten the two screws.
1EFF : ALL 1 27-96-00Page 532 1 1 Aug 01/05R 1 1 1CES 1
(3)
Close the access door 822.
(4)
Remove the access platform(s).
1EFF : ALL 1 27-96-00Page 533 1 1 Aug 01/05R 1 1 1CES 1
TASK 27-96-00-710-011
Operational Test after Removal/Installation of the Pressure Switches (10CE1, 10CE2, 10CE3)
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 1.6 m (5 ft. 3 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 31-32-00-860-006 Procedure to Get Access to the SYSTEM REPORT/TEST F/CTL Page
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱9(124)
