3. Job Set-up
__________
 **ON A/C 001-049, 051-099, 101-149, 201-299, 301-399,

 Subtask 27-92-16-010-050
 A. Get Access
 (1)
 Put the access platform in position at the access door 825.

 (2)
 Open the access door 825.

 (3)
 Remove the sidewall panel :
 FOR 12CE1, 12CE3
 131MW
 FOR 12CE2, 12CE4
 132MW

 (4)
 Put the access platform in position at the access door 822.

 (5)
 Open the access door 822

 (6)
 At the battery power center 105VU:

 -loosen the two screws and remove the protective cover. R **ON A/C 151-199, 401-499,
 Subtask 27-92-16-010-050-A
 A. Get Access
 (1)
 Put the access platform in position at the access door 825.

 (2)
 Open the access door 825.

 (3)
 Remove the sidewall panel :
 FOR 12CE1, 12CE3
 131GW
 FOR 12CE2, 12CE4
 132KW

 (4)
 Put the access platform in position at the access door 822.

 (5)
 Open the access door 822

 (6)
 At the battery power center 105VU:

 -loosen the two screws and remove the protective cover.
 **ON A/C ALL
 Subtask 27-92-16-865-050
 B. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------FOR 12CE1
 49VU FLIGHT CONTROLS/ELAC1/NORM/SPLY 15CE1 B11 105VU FLT CTL/ELAC1/STBY SPLY 16CE1 A01 FOR 12CE2 49VU FLIGHT CONTROLS/SEC1/NORM/SPLY 21CE1 B08 105VU FLT CTL/SEC1/STBY SPLY 22CE B01
 FOR 12CE3 105VU FLIGHT CONTROLS/ELAC2/STBY SPLY 16CE2 A02 121VU FLIGHT CONTROLS/ELAC2/NORM/SPLY 15CE2 R20
 FOR 12CE4 121VU FLIGHT CONTROLS/SEC2/SPLY 21CE2 Q18
 4. Procedure
_________
 **ON A/C 001-049, 051-099, 101-149, 201-299, 301-399,
 (Ref. Fig. 401/TASK 27-92-16-991-001)
R **ON A/C 151-199, 401-499,
 (Ref. Fig. 401A/TASK 27-92-16-991-001-A)

 Flight Control Accelerometer
 Figure 401/TASK 27-92-16-991-001

R 1EFF : 001-049, 051-099, 101-149, 201-299, 1 27-92-16Page 404 1301-399, 1May 01/05 1 1 1CES 1

 Flight Control Accelerometer
 Figure 401A/TASK 27-92-16-991-001-A

R 1EFF : 151-199, 401-499, 1 27-92-16Page 405 1 1 Aug 01/05 1 1 1CES 1R **ON A/C ALL

 Subtask 27-92-16-020-050
 A. Removal of the Flight Control Accelerometer
 (1)
 Disconnect the electrical connector (3) from the accelerometer (1).

 (2)
 Put blanking caps on the electrical connectors (3) and (6).

 (3)
 Remove the screws (5) and the washers (4).

 (4)
 Remove the accelerometer (1).

 TASK 27-92-16-400-001
 Installation of the Flight Control Accelerometer (12CE1,12CE2,12CE3,12CE4)

 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific access platform 1.6 m (5 ft. 3 in.)
 B. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 31-21-00-750-002 Procedure to set the Clock
 **ON A/C 001-049, 051-099, 101-149, 201-299, 301-399,
 27-92-16-991-001 Fig. 401 R **ON A/C 151-199, 401-499,
 27-92-16-991-001-A Fig. 401A **ON A/C ALL

 3. Job Set-up
__________
 **ON A/C 001-049, 051-099, 101-149, 201-299, 301-399,

 Subtask 27-92-16-860-051
 A. Aircraft Maintenance Configuration
 (1)
 Make sure that the access platform is in position at the access door

 825.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱9(25)