曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

carriage [49].
(b) Remove the nuts [46], washers [47] and bolts [50] that attach the carriage bushings [48] to
the carriage [49].
(c) Remove the carriage bushings [48] from the carriage [49].
(d) Move the gimbal assembly [45] away from the carriage [49].
SUBTASK 27-51-32-020-005
(3) Disconnect the ballscrew assembly [44] from the yoke [56] on the transmission [53]:
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-32
Page 409
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(a) Remove the nuts [62], washers [61], washers [60] and bolts [59] that attach the ballscrew
assembly [44] to the yoke [56].
(b) Remove the ballscrew assembly [44] from the yoke [56].
NOTE: You can turn the ballscrew assembly [44] and the gimbal assembly [45] to remove
the ballscrew assembly [44].
(c) Remove the ballscrew assembly [44] with the gimbal assembly [45].
SUBTASK 27-51-32-020-006
(4) If it is necessary, remove the gimbal assembly [45] from the ballscrew nut [58]:
(a) Remove the bolts [43], washers [41] and collars [51] that attach the gimbal bushings [42] to
the gimbal assembly [45].
(b) Remove the gimbal assembly [45] from the ballscrew nut [58].
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-32
Page 410
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Inboard Flap Inboard Ballscrew and Gimbal Installation
Figure 402 (Sheet 1 of 3)/27-51-32-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-32
Page 411
Jun 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Inboard Flap Inboard Ballscrew and Gimbal Installation
Figure 402 (Sheet 2 of 3)/27-51-32-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL; AIRPLANES WITH VERTICAL TORQUE TRIP
INDICATORS
27-51-32
Page 412
Jun 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Inboard Flap Inboard Ballscrew and Gimbal Installation
Figure 402 (Sheet 3 of 3)/27-51-32-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL; AIRPLANES WITH HORIZONTAL TORQUE TRIP
INDICATORS
27-51-32
Page 413
Jun 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-51-32-400-802
5. Inboard Flap Inboard Ballscrew and Gimbal Installation
(Figure 402)
A. General
(1) This task is applicable to the ballscrew and gimbal at flap supports No. 4 and 5.
B. References
Reference Title
12-22-51-640-802 Inboard Flap Inboard Ballscrew Lubrication (P/B 301)
27-51-00-440-801 Trailing Edge Flap System Reactivation (P/B 201)
27-51-00-820-802 Trailing Edge Flap Drive System Adjustment (P/B 501)
27-51-00-860-801 Trailing Edge Flap System Operation With Primary Control (P/B 201)
29-11-00-860-801 Hydraulic System A or B Pressurization (P/B 201)
29-11-00-860-805 Hydraulic System A or B Power Removal (P/B 201)
C. Consumable Materials
Reference Description Specification
D00633 Grease - Aircraft General Purpose BMS3-33
D. Expendables/Parts
AMM Item Description AIPC Reference AIPC Effectivity
41 Washer 27-51-32-02-015 GUN 001-007, 155-157,
201-999
43 Bolt 27-51-32-02-010 GUN 001-007, 155-157,
201-999
44 Ballscrew assembly 27-51-32-02-050 GUN 001-007, 155-157,
201-999
45 Gimbal assembly 27-51-32-02-025 GUN 001-007, 155-157,
201-999
E. Location Zones
Zone Area
133 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Left
134 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Right
541 Left Wing - Fairing Flap Support No. 4
641 Right Wing - Fairing Flap Support No. 5
F. Inboard Flap Inboard Ballscrew and Gimbal Installation
SUBTASK 27-51-32-420-004
(1) If you removed it, install the gimbal assembly [45] on the ballscrew nut [58]:
(a) Put the gimbal assembly [45] in its location on the ballscrew nut [58].
(b) Install the gimbal bushings [42] through the gimbal assembly [45] on the ballscrew nut [58].
(c) Install the bolts [43], washers [41] and washers [41] to attach the gimbal bushings [42] to
the gimbal assembly [45].
SUBTASK 27-51-32-420-005
(2) Connect the ballscrew assembly [44] to the yoke [56] on the transmission [53]:
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊5 AIRCRAFT MAINTENANCE MANUA(53)