曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

#14 TRACK I.D. 0.3125 in 0.3130 in 0.3170 in
7.9375 mm 7.9502 mm 8.0518 mm 0.0050 in
#14 BOLT O.D. 0.3110 in 0.3120 in 0.3080 in 0.1270 mm
7.8994 mm 7.9248 mm 7.8232 mm
#15 BUSHING I.D. 0.4375 in 0.4382 in 0.4382 in
11.113 mm 11.130 mm 11.1300 mm 0.0017 in
#15 BUSHING O.D. 0.4365 in 0.4370 in 0.4365 in 0.0431 mm
11.087 mm 11.100 mm 11.0870 mm
#16 BUSHING I.D. 0.3125 in 0.3130 in 0.3170 in
7.9375 mm 7.9502 mm 8.0518 mm 0.0050 in
#16 BOLT O.D. 0.3110 in 0.3120 in 0.3080 in 0.1270 mm
7.8994 mm 7.9248 mm 7.8232 mm
SUBTASK 27-51-22-420-004
(4) Do this task: Outboard Aft Flap Installation, TASK 27-51-22-400-801.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-22
Page 604
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Outboard Aft Flap Inspection
Figure 601 (Sheet 1 of 4)/27-51-22-990-803
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-22
Page 605
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Outboard Aft Flap Inspection
Figure 601 (Sheet 2 of 4)/27-51-22-990-803
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-22
Page 606
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Outboard Aft Flap Inspection
Figure 601 (Sheet 3 of 4)/27-51-22-990-803
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-22
Page 607
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Outboard Aft Flap Inspection
Figure 601 (Sheet 4 of 4)/27-51-22-990-803
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-22
Page 608
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
OUTBOARD FLAP CARRIAGES - REMOVAL/INSTALLATION
1. General
A. This procedure has these tasks:
(1) A removal of the outboard carriage for the outboard flap
(2) An installation of the outboard carriage for the outboard flap
(3) A removal of the inboard carriage for the outboard flap
(4) An installation of the inboard carriage for the outboard flap.
TASK 27-51-23-000-801
2. Outboard Flap Outboard Carriage Removal
(Figure 401)
A. General
(1) This task is applicable to the flap carriages at flap supports No. 1 and 8.
B. References
Reference Title
27-51-00-040-801 Trailing Edge Flap System Deactivation (P/B 201)
27-51-21-000-801 Outboard Trailing Edge Flap Removal (P/B 401)
C. Location Zones
Zone Area
544 Left Wing - Fairing Flap Support No. 1
567 Left Wing - Outboard Flap
644 Right Wing - Fairing Flap Support No. 8
667 Right Wing - Outboard Flap
D. Prepare for the Removal
SUBTASK 27-51-23-040-001
(1) Do this task: Trailing Edge Flap System Deactivation, TASK 27-51-00-040-801.
SUBTASK 27-51-23-020-001
(2) Do this task: Outboard Trailing Edge Flap Removal, TASK 27-51-21-000-801.
E. Outboard Flap Outboard Carriage Removal
SUBTASK 27-51-23-020-002
(1) Remove the nut [13], washer [12], washer [10], bolt [9] and bushing [11] that attach the aft flap
pushrod [16] to the aft flap [3].
SUBTASK 27-51-23-020-003
(2) Remove the bellcrank assembly [19] from the carriage assembly [1]:
NOTE: You can remove the aft flap drive rod [18] and the aft flap pushrod [16] with the
bellcrank assembly [19].
(a) Remove the nuts [28], washers [27], bolt [20] and bolt [26] that attach the rubcap [17] to the
bellcrank assembly [19].
(b) Remove the nut [24], washer [23], washer [22] and bolt [21] that attach the bellcrank
assembly [19] to the carriage assembly [1].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-23
Page 401
Jun 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(c) Measure and record the distance between the center of the bolt hole in the adjustment
fitting [54] and the bellcrank assembly [19].
NOTE: This distance is referred to as Dimension A. This dimension will be used during
the installation of the bellcrank assembly [19].
SUBTASK 27-51-23-980-001
(3) Manually extend the aft flap [3] away from the main flap [2].
SUBTASK 27-51-23-010-001
(4) Remove the leading edge skin panel [33] from the main flap [2] forward of the carriage
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊5 AIRCRAFT MAINTENANCE MANUA(4)