曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

(d) Move the seal [47] and the retainer [48].
NOTE: Make sure you move the seal [47] and the retainer [48] together as a unit.
(e) Tighten the nuts [46] on the retainer [48].
(f) Lift the aft end of the aft fairing assembly [44] to align the drive rod [57] with the carriage
[49].
(g) Install the bushing [52], bolt [50], washer [51], washer [53] and nut [54] to attach the drive
rod [57] to the carriage [49].
NOTE: Install the bolt [50] with the head on the outboard side.
(h) Install the cotter pin [55] in the nut [54].
SUBTASK 27-51-28-410-008
(9) On the side of the aft fairing assembly [44].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-28
Page 512
Jun 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Close the applicable access panels:
Number Name/Location
543DR Flap Support No. 2 Access Door
643DL Flap Support No. 7, Access Door
I. Outboard Flap Inboard Forward Fairing Adjustment
SUBTASK 27-51-28-220-005
(1) Measure the mismatch between the forward fairing assembly [43] and the aft fairing
assembly [44].
NOTE: Measure the mismatch on the inboard side and on the bottom of the forward fairing
assembly [43].
(a) Make sure the mismatch is in the limit of +0.03 to -0.01 inch (+0.76 to -0.25 millimeter).
NOTE: A positive (+) mismatch is when the forward fairing assembly [43] extends past
the aft fairing assembly [44]. A negative (-) mismatch is when the aft fairing
assembly [44] extends past the forward fairing assembly [43].
SUBTASK 27-51-28-220-006
(2) Make sure the seals [66] on the sides of the forward fairing assembly [43] are compressed 10 to
25 percent against the lower surface of the main flap [42].
SUBTASK 27-51-28-020-012
(3) If the mismatch is not in the limit or if the seals [66] are not compressed correctly, do this task:
Outboard Flap Inboard Support Forward Fairing Removal, TASK 27-51-28-000-803.
SUBTASK 27-51-28-820-015
(4) If the mismatch between the forward fairing assembly [43] and the aft fairing assembly [44] is not
in the limit, then adjust the position of the forward fairing assembly [43]:
(a) If the mismatch is not in the limit on the inboard side of the forward fairing assembly [43],
adjust the position of the fairing attach fitting [64]:
1) Loosen the bolts [63] that attach the fairing attach fitting [64] to the transmission attach
fitting [62].
2) Move the fairing attach fitting [64] inboard or outboard to get the mismatch in the
clearance.
3) Tighten the bolts [63].
4) Install lockwire on bolts [63].
(b) If the mismatch is not in the limit on the bottom of the forward fairing assembly [43], change
the thickness of the shims [65].
1) Apply primer, C00259 to the mating surfaces of the shim [65] and the fairing attach
fitting [64].
SUBTASK 27-51-28-820-016
(5) If the seals [66] are not compressed evenly against the lower surface of the main flap [42], adjust
the position of the seals [66]:
(a) Loosen the nuts [67] on the retainer [68].
(b) Move the seal [66] and the retainer [68].
(c) Tighten the nuts [67] that hold the retainer [68].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-28
Page 513
Oct 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-51-28-420-008
(6) If you removed the forward fairing assembly [43], do this task: Outboard Flap Inboard Support
Forward Fairing Installation, TASK 27-51-28-400-803.
J. Put the Airplane Back to Its Usual Condition
SUBTASK 27-51-28-440-006
(1) Do this task: Trailing Edge Flap System Reactivation, TASK 27-51-00-440-801.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-28
Page 514
Oct 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Outboard Flap Inboard Support Fairing Adjustment
Figure 502 (Sheet 1 of 4)/27-51-28-990-804
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-28
Page 515
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Outboard Flap Inboard Support Fairing Adjustment
Figure 502 (Sheet 2 of 4)/27-51-28-990-804
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-28
Page 516
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊5 AIRCRAFT MAINTENANCE MANUA(43)