曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

27-51-00-860-801 Trailing Edge Flap System Operation With Primary Control (P/B 201)
B. Consumable Materials
Reference Description Specification
D00054 Fluid - Hydraulic Assembly Lubricant - MCS 352B
(Formally Monsanto MCS 352B)
D00153 Fluid - Hydraulic, Erosion Arresting, Fire Resistant BMS3-11, Type
IV
(interchange~
able&
intermixable
with Type V)
C. Location Zones
Zone Area
134 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Right
D. Procedure
SUBTASK 27-51-65-420-003
(1) Install solenoid valve assembly [21] in the flap control valve assembly [6]:
(a) Apply fluid, D00153, or MCS 352B fluid, D00054 to the new packing [22].
(b) Put the packing [22] and gasket [19] in their locations on the solenoid valve assembly [21].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-65
Page 410
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(c) Put the solenoid valve assembly [21] in its position on the flap control valve assembly [6].
NOTE: Make sure the electrical connector on the solenoid valve assembly [21] engages
the electrical connector in the flap control valve assembly [6].
(d) Install the screws [20] to attach the solenoid valve assembly [21] to the flap control valve
assembly [6].
(e) Tighten the screws [20] to 25-35 pound-inches (2.9-3.9 newton-meters).
(f) Install lockwire on the screws [20].
SUBTASK 27-51-65-860-009
(2) Remove the safety tag and close this circuit breaker:
F/O Electrical System Panel, P6-2
Row Col Number Name
A 6 C00566 FLIGHT CONTROL FLAP LOAD RELIEF
SUBTASK 27-51-65-860-010
(3) Use the primary system to extend and retract the flaps. To extend and retract the flaps, do this
task: Trailing Edge Flap System Operation With Primary Control, TASK 27-51-00-860-801.
SUBTASK 27-51-65-210-002
(4) Make sure there are no hydraulic leaks from the flap control valve assembly [6].
SUBTASK 27-51-65-720-001
(5) Do this task: Trailing Edge Flap Load Relief System BITE Test, TASK 27-51-00-740-803.
E. Put the Airplane Back to Its Usual Condition
SUBTASK 27-51-65-610-002
(1) Service the system B hydraulic reservoir. To service the reservoir, do this task: Hydraulic
Reservoir Servicing, TASK 12-12-00-610-801.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-65
Page 411
Jun 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TRAILING EDGE FLAP CONTROL VALVE - ADJUSTMENT/TEST
1. General
A. This procedure has an adjustment of the trailing edge flap control valve.
TASK 27-51-65-820-801
2. Trailing Edge Flap Control Valve Adjustment
(Figure 501)
A. References
Reference Title
27-51-00-860-801 Trailing Edge Flap System Operation With Primary Control (P/B 201)
29-11-00-860-801 Hydraulic System A or B Pressurization (P/B 201)
29-11-00-860-805 Hydraulic System A or B Power Removal (P/B 201)
B. Tools/Equipment
Reference Description
STD-4592 Rig Pin, 0.310-0.312 in diameter
C. Consumable Materials
Reference Description Specification
C00913 Compound - Nondrying Resin Mix Corrosion
Inhibiting Material
BMS3-27
D. Expendables/Parts
AMM Item Description AIPC Reference AIPC Effectivity
4 Valve assembly 27-51-61-01-265 GUN 001-007, 014-030,
109-122, 155-157, 201-
999
E. Location Zones
Zone Area
134 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Right
F. Prepare for the Adjustment
SUBTASK 27-51-65-860-011
WARNING: KEEP PERSONS AND EQUIPMENT CLEAR OF THE FLIGHT CONTROL SURFACES, THE
THRUST REVERSERS, AND THE LANDING GEAR. THESE COMPONENTS CAN MOVE
SUDDENLY WHEN YOU SUPPLY HYDRAULIC POWER. THIS CAN CAUSE INJURIES TO
PERSONS AND DAMAGE TO EQUIPMENT.
(1) Supply system B hydraulic power, do this task: Hydraulic System A or B Pressurization,
TASK 29-11-00-860-801.
SUBTASK 27-51-65-860-012
(2) Extend the trailing edge flaps to the 40-unit position. To extend the flaps, do this task: Trailing
Edge Flap System Operation With Primary Control, TASK 27-51-00-860-801.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-65
Page 501
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-51-65-860-013
(3) Retract the trailing edge flaps to the UP position. To retract the flaps, do this task: Trailing Edge
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊5 AIRCRAFT MAINTENANCE MANUA(115)