曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

OUTBOARD AFT FLAP ACTUATING MECHANISM - REMOVAL/INSTALLATION
1. General
A. This procedure has these tasks:
(1) A removal of the aft flap actuating mechanisms for the outboard flaps
(2) An installation of the aft flap actuating mechanisms for the outboard flaps.
B. The aft flap actuating mechanisms includes the bellcranks, the forward pushrod and the aft pushrod.
TASK 27-51-24-000-801
2. Outboard Aft Flap Actuating Mechanism Removal
(Figure 401)
A. General
(1) This task is applicable to the aft flap actuating mechanism on the inboard flap support and the
outboard flap support on the outboard flap.
B. References
Reference Title
27-51-00-040-801 Trailing Edge Flap System Deactivation (P/B 201)
27-51-00-860-803 Extend the Trailing Edge Flaps (P/B 201)
27-51-28-000-802 Outboard Flap Outboard Support Aft Fairing Removal (P/B 401)
27-51-28-000-804 Outboard Flap Inboard Support Aft Fairing Removal (P/B 401)
C. Location Zones
Zone Area
567 Left Wing - Outboard Flap
667 Right Wing - Outboard Flap
D. Prepare for the Removal
SUBTASK 27-51-24-860-001
(1) Extend the trailing edge flaps to the 40-unit position. To extend them, do this task: Extend the
Trailing Edge Flaps, TASK 27-51-00-860-803.
SUBTASK 27-51-24-040-001
(2) Do this task: Trailing Edge Flap System Deactivation, TASK 27-51-00-040-801.
SUBTASK 27-51-24-010-001
(3) Remove the applicable fairing from the outboard flap:
(a) Do this task: Outboard Flap Outboard Support Aft Fairing Removal,
TASK 27-51-28-000-802.
(b) Do this task: Outboard Flap Inboard Support Aft Fairing Removal,
TASK 27-51-28-000-804.
E. Outboard Aft Flap Actuating Mechanism Removal
SUBTASK 27-51-24-020-001
(1) Remove the nut [23], washer [22], washer [20], bolt [19] and bushing [21] that attach the aft rod
assembly [2] to the aft flap [1].
NOTE: When you disconnect the aft rod assembly [2] from the aft flap [1], the aft flap [1] can
move a small distance.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-24
Page 401
Jun 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-51-24-020-002
(2) Remove the nut [14], washer [13], washer [11], bolt [10] and bushing [12] that attach the forward
rod assembly [16] to the drive rod attach fitting [9].
SUBTASK 27-51-24-020-003
(3) Remove the nuts [7], washers [6], bushings [5], washers [4] and bolts [3] that attach the aft rod
assembly [2] and the forward rod assembly [16] to the bellcrank assembly [17].
SUBTASK 27-51-24-020-004
(4) Remove the bellcrank assembly [17] from the flap carriage [18]:
(a) Remove the nuts [26] and washers [27] from the bolts [28] that attach the rubcap [25] to the
bellcrank assembly [17].
(b) Remove the nut [32], washer [31], washer [30] and bolt [29] that attach the bellcrank
assembly [17] to the flap carriage [18].
(c) Measure and record the distance between the center of the bolt hole in the adjustment
fitting [36] and the bellcrank assembly [17].
NOTE: This distance is referred to as Dimension A.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-24
Page 402
Jun 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Outboard Aft Flap Drive Mechanism Installation
Figure 401 (Sheet 1 of 3)/27-51-24-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-24
Page 403
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Outboard Aft Flap Drive Mechanism Installation
Figure 401 (Sheet 2 of 3)/27-51-24-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-24
Page 404
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Outboard Aft Flap Drive Mechanism Installation
Figure 401 (Sheet 3 of 3)/27-51-24-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-24
Page 405
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-51-24-400-801
3. Outboard Aft Flap Actuating Mechanism Installation
(Figure 401)
A. General
(1) This task is applicable to the aft flap actuating mechanism on the inboard flap support and the
outboard flap support on the outboard flap.
B. References
Reference Title
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊5 AIRCRAFT MAINTENANCE MANUA(14)