曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

SUBTASK 27-51-28-020-008
(5) Remove the aft fairing assembly [82]:
(a) Support the aft fairing assembly [82].
(b) Disconnect the aft end of the aft fairing assembly [82]:
1) Remove the nut [110], washer [109], washer [107], bolt [106] and bushing [108] that
attach the drive rod assembly [112] to the carriage [105].
2) Remove the nut [118], washer [117], washer [115], bolt [114] and bushing [116] that
attach the end of the attach beam assembly [134] to the flap track [87].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-28
Page 424
Jun 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(c) Disconnect the forward end of the aft fairing assembly [82]:
1) Remove the nut [101] and washer [100] from the pivot bolt [97].
2) Remove the pivot bolt [97], washer [98] and bushing [99] that attach the aft fairing
assembly [82] to the transmission attach fitting [91].
(d) Lower the aft fairing assembly [82] until you can get access to the nuts [92] on the jumper
wires [103].
(e) Remove the nuts [92] and washers [93] that attach the jumper wires [103].
(f) Remove the jumper wires [103] from the studs.
(g) Lower the aft fairing assembly [82].
SUBTASK 27-51-28-020-009
(6) If you will install a new aft fairing assembly [82], remove the fairing drive linkage from the aft
fairing assembly [82]:
NOTE: The fairing drive linkage includes the drive rod assembly [112], adjust link
assembly [120], adjust rod assembly [121] and the attach beam assembly [134].
(a) Remove the nut [126], washer [125], washer [123], bolt [122] and bushing [124] that attach
the adjust rod assembly [121] to the aft fairing assembly [82].
(b) Remove the adjust link assembly [120] from the aft fairing assembly [82]:
1) Remove the nut [137] and washer [138] from the bolt [142].
2) Remove the bolt [142], washer [143], washer [144] and washers [135].
NOTE: Make a note of the thickness and location of the washers [135].
3) Remove the bushing [140] and bushing [141] from the aft fairing assembly [82].
(c) Remove the nut [132], washer [131], washer [129], bolt [128] and bushing [130] that attach
the adjust link assembly [120] to the attach beam assembly [134].
(d) Remove the nut [110], washer [109], washer [107], bolt [106] and bushing [108] that attach
the drive rod assembly [112] to the attach beam assembly [134].
(e) Remove the nut [126], washer [125], washer [123], bolt [122] and bushing [124] that attach
the adjust rod assembly [121] to the adjust link assembly [120].
SUBTASK 27-51-28-010-006
(7) If it is necessary, remove the tailcone assembly [147] from the aft fairing assembly [82]:
(a) Remove the bolts [148] that attach the tailcone assembly [147] to the aft fairing
assembly [82].
(b) Remove the tailcone assembly [147] from the aft fairing assembly [82].
------------------------- END OF TASK ---------------------------
TASK 27-51-28-400-804
9. Outboard Flap Inboard Support Aft Fairing Installation
(Figure 402)
A. General
(1) This task is applicable to the aft fairing at flap supports No. 2 and 7.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-28
Page 425
Jun 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
B. References
Reference Title
27-51-00-440-801 Trailing Edge Flap System Reactivation (P/B 201)
27-51-00-860-804 Retract the Trailing Edge Flaps (P/B 201)
27-51-28-820-802 Outboard Flap Inboard Support Fairing Adjustment (P/B 501)
C. Consumable Materials
Reference Description Specification
A02315 Sealant - Low Density, Synthetic Rubber. 2 Part BMS5-142
D00013 Grease - Aircraft And Instrument Grease MIL-PRF-23827
(NATO G-354)
(Supersedes
MIL-G-23827)
D00633 Grease - Aircraft General Purpose BMS3-33
D. Expendables/Parts
AMM Item Description AIPC Reference AIPC Effectivity
82 Fairing assembly 27-51-28-04-210 GUN 001-028, 101-121,
155-157, 201-999
27-51-28-04-215 GUN 001-028, 101-121,
155-157, 201-999
111 Pin 27-51-28-04-365 GUN 001-028, 101-121,
155-157, 201-999
112 Rod assembly 27-51-28-04-395 GUN 001-028, 101-121,
155-157, 201-999
120 Link assembly 27-51-28-04-315 GUN 001-028, 101-121,
155-157, 201-999
121 Rod assembly 27-51-28-04-250 GUN 001-028, 101-121,
155-157, 201-999
127 Pin 27-51-28-04-220 GUN 001-028, 101-121,
155-157, 201-999
133 Pin 27-51-28-04-285 GUN 001-028, 101-121,
155-157, 201-999
134 Beam assembly 27-51-28-04-460 GUN 001-028, 101-121,
155-157, 201-999
27-51-28-04-465 GUN 001-028, 101-121,
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊5 AIRCRAFT MAINTENANCE MANUA(36)