曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

1) Install the bushing [124], bolt [122], washer [123], washer [125] and nut [126] that attach
the adjust rod assembly [121] to the aft fairing assembly [82].
2) Install the pin [127] in the nut [126].
SUBTASK 27-51-28-420-006
(2) Install the aft fairing assembly [82]:
(a) Connect the jumper wires [103]:
1) Lift the forward end of the aft fairing assembly [82] until you can put the jumper wires
[103] on the studs.
2) Install the washers [93] and nuts [92] to attach the jumper wires [103].
3) Apply sealant, A02315 to the nuts [92].
(b) Connect the forward end of the aft fairing assembly [82] to the transmission attach fitting
[91]:
1) Lift the forward end of the aft fairing assembly [82] until it aligns with the transmission
attach fitting [91].
2) Install the bushing [99], pivot bolt [97], washer [98], washer [100] and nut [101].
3) Tighten the nut [101]:
a) Tighten the nut [101] to 1200-1410 pound-inches (135.6-159.3 newton-meters) if the
bolt [97] is not lubricated.
b) Tighten the nut [101] to 920-1000 pound-inches (103.9-112.9 newton-meters) if the
bolt [97] is lubricated with grease, D00633 or grease, D00013.
(c) Connect the aft end of the aft fairing assembly [82]:
1) Move the attach beam assembly [134] until it aligns with the flap track [87].
2) Install the bushing [116], bolt [114], washer [115], washer [117] and nut [118].
3) Tighten the nut [118]:
a) Tighten the nut [118] to 1300-1470 pound-inches (146.9-166.1 newton-meters) if the
bolt [114] is not lubricated.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-28
Page 428
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
b) Tighten the nut [118] to 840-920 pound-inches (94.9-103.9 newton-meters) if the bolt
[114] is lubricated with grease, D00633 or grease, D00013.
4) Install the pin [119] in the nut [118].
5) Align the drive rod assembly [112] with the carriage [105].
6) Install the bushing [108], bolt [106], washer [107], washer [109] and nut [110].
NOTE: Install the bolt [106] with the head on the outboard side.
7) Install the pin [111] in the nut [110].
H. Put the Airplane Back to Its Usual Condition
SUBTASK 27-51-28-440-004
(1) Do this task: Trailing Edge Flap System Reactivation, TASK 27-51-00-440-801.
SUBTASK 27-51-28-860-004
(2) Retract the flaps to the retracted position. To retract them, do this task: Retract the Trailing
Edge Flaps, TASK 27-51-00-860-804.
SUBTASK 27-51-28-820-004
(3) Do this task: Outboard Flap Inboard Support Fairing Adjustment, TASK 27-51-28-820-802.
SUBTASK 27-51-28-410-004
(4) Install the access cover [83] and access cover [102] on the forward end of the aft fairing
assembly [82]:
(a) These are the covers:
Number Name/Location
543CL Flap Support No. 2 Access Cover
543CR Flap Support No. 2 Access Cover
643CL Flap Support No. 7, Access Cover
643CR Flap Support No. 7, Access Cover
(b) Put the access cover [83] and access cover [102] in their locations on the aft fairing
assembly [82].
(c) Install the bolts [94] that attach the access cover [83] and access cover [102].
SUBTASK 27-51-28-410-005
(5) If it is open, close the access door [113] on the aft fairing assembly [82]:
(a) These are the doors:
Number Name/Location
543DR Flap Support No. 2 Access Door
643DL Flap Support No. 7, Access Door
(b) Turn the access door [113] around the screw [146] until it is in its position.
(c) Install the bolts [145] that attach the access door [113] to the aft fairing assembly [82].
(d) Tighten the screw [146] on the access door [113].
SUBTASK 27-51-28-410-006
(6) If it is not installed, install the tailcone assembly [147] on the aft fairing assembly [82]:
(a) Put the tailcone assembly [147] in its location on the aft fairing assembly [82].
(b) Install the bolts [148] that attach the tailcone assembly [147].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-28
Page 429
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(c) Fill and aerodynamically fair the clearance between the tailcone assembly [147] and the aft
fairing assembly [82] with sealant, A02315.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-28
Page 430
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
OUTBOARD FLAP SUPPORT FAIRINGS - ADJUSTMENT/TEST
1. General
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊5 AIRCRAFT MAINTENANCE MANUA(38)