曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

SUDDENLY WHEN YOU SUPPLY HYDRAULIC POWER. THIS CAN CAUSE INJURIES TO
PERSONS AND DAMAGE TO EQUIPMENT.
(3) Supply system B hydraulic power, do this task: Hydraulic System A or B Pressurization,
TASK 29-11-00-860-801.
SUBTASK 27-51-04-860-003
(4) Use the primary system to extend and retract the flaps. To extend and retract the flaps, do this
task: Trailing Edge Flap System Operation With Primary Control, TASK 27-51-00-860-801.
SUBTASK 27-51-04-210-001
(5) Examine the hydraulic fittings for leaks.
SUBTASK 27-51-04-860-004
(6) Remove system B hydraulic power, do this task: Hydraulic System A or B Power Removal,
TASK 29-11-00-860-805.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-04
Page 406
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
FLAP CONTROL LEVER POSITION SENSOR - MAINTENANCE PRACTICES
1. General
A. This procedure has these tasks:
(1) A removal of the flap control lever position sensor
(2) An installation of the flap control lever position sensor
(3) An adjustment of the flap control lever position sensor
(4) An system test of the flap control lever position sensor
(5) A detailed visual inspection of the flap control lever sensor, linkage and rod ends.
B. The flap control lever position sensor is installed in the control stand and operates from the flap
control lever.
TASK 27-51-06-000-802
2. Flap Control Lever Position Sensor Removal
(Figure 201)
A. Location Zones
Zone Area
211 Flight Compartment - Left
212 Flight Compartment - Right
B. Prepare for the Removal
SUBTASK 27-51-06-860-011
(1) Open this circuit breaker and install safety tag:
F/O Electrical System Panel, P6-2
Row Col Number Name
A 12 C00213 FC TE FLAP POS/SKEW SNSR & IND LEFT
SUBTASK 27-51-06-010-007
(2) Remove the side cover [3] from the lower right side of the control stand [7]:
(a) Remove the screws [5] and the pocket assembly [6] from the side cover [3].
(b) Loosen the two lower screws [8] for the upper side cover [1] on the right side of the control
stand [7].
(c) Remove the screws [4] that attach the lower side cover [3] to the control stand [7].
(d) Remove the lower side cover [3] from the control stand [7].
NOTE: It is necessary to move the lower side cover [3] down, away from the upper side
cover [1].
C. Flap Control Lever Position Sensor Removal
SUBTASK 27-51-06-020-005
(1) Disconnect the electrical connector [9] for the flap control lever position sensor [20].
SUBTASK 27-51-06-020-006
(2) Remove the flap control lever position sensor assembly [2]:
NOTE: The position sensor assembly [2] includes the position sensor [20], bracket
assembly [23], bracket [24] and the crank [18].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-06
Page 201
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(a) Remove the bolt [15], washers [16] and clamp [14] that attach the wire for the electrical
connector [9].
(b) Remove the bolts [11], washers [12], nuts [13] and clamps [10] that attach the wire for the
electrical connector [9].
(c) Remove the bolt [22] and nut [21] that attach the link [17] to the crank [18].
(d) Remove the screws [19] that attach the flap control lever position sensor assembly [2] to
the control stand [7].
SUBTASK 27-51-06-020-007
(3) Remove the flap control lever position sensor [20] from the position sensor assembly [2]:
(a) Remove the screw [27], washers [28] and nut [29] that attach the crank [18] to the shaft on
the position sensor [20].
(b) Remove the screws [25] and washers [26] that attach the position sensor [20] to the
bracket [24].
(c) Remove the flap control lever position sensor [20] from the bracket [24].
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-06
Page 202
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Flap Control Lever Position Sensor Installation
Figure 201 (Sheet 1 of 3)/27-51-06-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-06
Page 203
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Flap Control Lever Position Sensor Installation
Figure 201 (Sheet 2 of 3)/27-51-06-990-801
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊4(74)