曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

(c) Remove the leading edge skin panel [55] from the main flap assembly [1].
SUBTASK 27-51-21-480-001
(4) Install the sling, SPL-1729 on the main flap assembly [1] (Figure 402):
(a) Remove the bolts [74] at the inboard end and outboard ends of the main flap assembly [1].
NOTE: The bolts [74] are located along the rear spar, above the inboard and outboard
carriages [13].
(b) Remove the bolts [75] at the front spar on the main flap assembly [1].
(c) Install the sling fittings [71] in the location of the bolts [74] and bolts [75].
(d) Connect the sling, SPL-1729 [72] to a 30 foot height (2000 lbs capacity) lift crane, STD-1095.
(e) Use the sling, SPL-1729 [72] to hold the weight of the outboard flap.
SUBTASK 27-51-21-020-003
(5) Remove the stop fittings from the flap tracks (Figure 401):
(a) On the outboard track [41], remove the roller stop [32], roller stop [42] and fairing attach
fitting [36]:
1) Remove the nuts [40], washers [39], washers [38] and bolts [37] that attach the roller
stop [32], roller stop [42] and fairing attach fitting [36] to the outboard track [41].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-21
Page 402
Jun 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
2) Remove the roller stop [32] and roller stop [42] from the outboard track [41].
3) Remove the nuts [35], washers [34] and bolts [33] that attach the fairing attach fitting
[36] to the outboard track [41].
4) Remove the fairing attach fitting [36] from the outboard track [41].
(b) On the inboard track [53], remove the roller stop [46], roller stop [54] and fairing attach
fitting [51]:
1) Remove the nuts [50], washers [49], washers [48] and bolts [47] that attach the roller
stop [46], roller stop [54] and fairing attach fitting [51] to the inboard track [53].
2) Remove the roller stop [46] and roller stop [54] from the inboard track [53].
3) Remove the nuts [45], washers [44], bolt [43] and bolts [52] that attach the fairing attach
fitting [51] to the inboard track [53].
4) Remove the fairing attach fitting [51] from the inboard track [53].
SUBTASK 27-51-21-020-004
(6) Remove the main flap assembly [1]:
(a) Hold the weight of the main flap assembly [1] with the sling, SPL-1729 [71].
(b) Disconnect the carriages [13] from the gimbals [20]:
1) Install a support to hold the ballscrews [19] and gimbals [20] when they are
disconnected from the carriages [13].
2) Remove the nuts [24], washers [23] and bolts [22] from the carriages [13].
3) Remove the inboard carriage bushings [27] and the outboard carriage bushings [21]
from the gimbals [20] and the carriages [13].
(c) Move the gimbals [20] away from the carriages [13].
CAUTION: BE VERY CAREFUL WHEN YOU LOWER THE FLAP TO THE GROUND. YOU CAN
CAUSE DAMAGE TO THE TRAILING EDGE OF THE FLAP.
(d) Use the sling, SPL-1729 and the 30 foot height (2000 lbs capacity) lift crane, STD-1095 to
move the main flap assembly [1] aft and down away from the tracks.
SUBTASK 27-51-21-220-004
(7) Measure and record the thickness of the shims [95] at the inboard carriage [96] and the outboard
carriage [101].
NOTE: You will use this dimension during the installation.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-21
Page 403
Jun 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Outboard Trailing Edge Flap Installation
Figure 401 (Sheet 1 of 7)/27-51-21-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-21
Page 404
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Outboard Trailing Edge Flap Installation
Figure 401 (Sheet 2 of 7)/27-51-21-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-21
Page 405
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Outboard Trailing Edge Flap Installation
Figure 401 (Sheet 3 of 7)/27-51-21-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-21
Page 406
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Outboard Trailing Edge Flap Installation
Figure 401 (Sheet 4 of 7)/27-51-21-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-21
Page 407
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊4(130)