曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-00
Page 539
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-51-00-730-801
5. Trailing Edge Flap System Test
(Figure 501)
A. General
(1) This task does a functional test of the trailing edge flap system. This task includes these parts:
(a) A test of the FSEU display and a check of existing faults
(b) A test of the asymmetry and skew systems
(c) A test of the load relief system
(d) A test of the primary operation
(e) A test of the power supply for the ALTERNATE FLAPS switches and the bypass valve
(f) A test of the power supply for the flap electric motor
(g) A test of the UP limit switch
(h) A test of the DOWN limit switch
(i) A test of the flap priority valve
(j) A test of the force required to move the flap control lever.
B. References
Reference Title
24-22-00-860-811 Supply Electrical Power (P/B 201)
29-11-00-860-801 Hydraulic System A or B Pressurization (P/B 201)
29-11-00-860-805 Hydraulic System A or B Power Removal (P/B 201)
C. Location Zones
Zone Area
117 Electrical and Electronics Compartment - Left
118 Electrical and Electronics Compartment - Right
211 Flight Compartment - Left
212 Flight Compartment - Right
D. Access Panels
Number Name/Location
117A Electronic Equipment Access Door
E. Prepare for the Test
SUBTASK 27-51-00-860-027
(1) Do this task: Supply Electrical Power, TASK 24-22-00-860-811.
SUBTASK 27-51-00-010-004
(2) to get access to the main equipment center.
Open this access panel:
Number Name/Location
117A Electronic Equipment Access Door
F. Trailing Edge Flap System Test
SUBTASK 27-51-00-730-001
(1) Do this task: FSEU Display and Existing Faults Test, TASK 27-51-00-740-801.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-00
Page 540
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-51-00-730-002
(2) Do this task: Trailing Edge Flap Asymmetry Skew System BITE Test, TASK 27-51-00-740-802.
SUBTASK 27-51-00-860-028
WARNING: KEEP PERSONS AND EQUIPMENT CLEAR OF THE FLIGHT CONTROL SURFACES, THE
THRUST REVERSERS, AND THE LANDING GEAR. THESE COMPONENTS CAN MOVE
SUDDENLY WHEN YOU SUPPLY HYDRAULIC POWER. THIS CAN CAUSE INJURIES TO
PERSONS AND DAMAGE TO EQUIPMENT.
(3) Use a hydraulic cart, or the EDP to supply system B hydraulic power, do this task: Hydraulic
System A or B Pressurization, TASK 29-11-00-860-801.
NOTE: The EMDP will not supply sufficient hydraulic power for this test.
SUBTASK 27-51-00-730-003
(4) Do this task: Trailing Edge Flap Load Relief System BITE Test, TASK 27-51-00-740-803.
SUBTASK 27-51-00-730-004
WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF THE LE AND TE
FLAPS AND FLAP DRIVE MECHANISMS. THE FLAPS CAN CAUSE INJURIES TO
PERSONS AND DAMAGE TO EQUIPMENT.
(5) Do a test of the primary operation of the trailing edge flaps:
(a) Move the flap control lever to the UP position and wait for the flaps to reach the UP position.
(b) Push the ON/OFF button on the front panel of the FSEU to turn on the display.
NOTE: The display will show EXISTING FAULTS?
(c) Do a check of the flap lever sensor, position sensors and skew sensor inputs to the FSEU:
1) Select OTHER FUNCTNS? from the MAIN MENU on the FSEU.
2) Select I/O MONITOR? from the OTHER FUNCTNS? menu.
3) Select SYNCHRO INPUTS? from the I/O MONITOR? menu.
4) Make sure the inputs for the sensors are in the limits shown in (Table 502) for the UP
position.
NOTE: Push the arrow keys to step through the sensor values.
Table 502/27-51-00-993-808
Display (Sensor)
Sensor Input (Flap Position)
UP 1-Unit 40-Units
LVR POS -2.8 to 2.8 13.8 to 21.4 105.4 to 110.9
L FL POS -3.7 to 1.8 34.5 to 40.8 267.1 to 273.3
R FL POS -3.7 to 1.8 34.5 to 40.8 267.1 to 273.3
F1 SKEW 295.7 to 311.0 12.2 to 29.1 224.4 to 242.1
F2 SKEW 330.5 to 346.0 60.9 to 78.1 279.2 to 296.9
F3 SKEW 0.0 to 13.2 82.9 to 99.2 288.7 to 305.5
F4 SKEW 332.8 to 346.9 24.3 to 40.0 265.1 to 282.1
F5 SKEW 13.1 to 27.2 320.0 to 335.7 77.9 to 94.9
F6 SKEW 346.8 to 360.0 260.8 to 277.1 54.5 to 71.3
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-00
Page 541
Feb 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(Continued)
Display (Sensor)
Sensor Input (Flap Position)
UP 1-Unit 40-Units
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊4(52)