曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

(1) A removal of the stabilizer trim motor
(2) An installation of the stabilizer trim motor.
TASK 27-41-71-000-801
2. Stabilizer Trim Motor Removal
(Figure 401)
A. Location Zones
Zone Area
210 Subzone - Control Compartment - Body Station 178.00 to Body
Station 259.50
311 Area Aft of Pressure Bulkhead - Left
312 Area Aft of Pressure Bulkhead - Right
B. Access Panels
Number Name/Location
311BL Stabilizer Trim Access Door
C. Prepare for the Removal
SUBTASK 27-41-71-860-007
(1) Open these circuit breakers and install safety tags:
CAPT Electrical System Panel, P18-1
Row Col Number Name
C 2 C00849 AFCS STABILIZER TRIM
F/O Electrical System Panel, P6-2
Row Col Number Name
B 10 C00207 FLIGHT CONTROL STAB TRIM CONT
D 10 C00840 FLIGHT CONTROL STAB TRIM ACTUATOR
SUBTASK 27-41-71-010-001
(2) To get access to the stabilizer trim motor [1], do this step:
Open this access panel:
Number Name/Location
311BL Stabilizer Trim Access Door
D. Stabilizer Trim Motor Removal
SUBTASK 27-41-71-020-001
(1) Remove the stabilizer trim motor [1]:
(a) Disconnect the electrical connectors [2] from the stabilizer trim motor [1].
(b) Remove the nuts [6], washers [5], and bolts [4] that attaches the stabilizer trim motor [1] to
the stabilizer trim actuator [3].
(c) Remove the nut [9], washer [8], and bolt [7] that attaches the stabilizer trim motor [1] to the
stabilizer trim actuator [3].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-41-71
Page 401
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(d) Remove the stabilizer trim motor [1].
(e) Put a cover on the mounting pad to keep unwanted materials out of the stabilizer trim
actuator [3].
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-41-71
Page 402
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Stabilizer Trim Motor Installation
Figure 401 (Sheet 1 of 2)/27-41-71-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-41-71
Page 403
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Stabilizer Trim Motor Installation
Figure 401 (Sheet 2 of 2)/27-41-71-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-41-71
Page 404
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-41-71-400-801
3. Stabilizer Trim Motor Installation
(Figure 401)
A. References
Reference Title
27-41-71-700-801 Stabilizer Trim Motor Test (P/B 501)
B. Tools/Equipment
NOTE: When more than one tool part number is listed under the same "Reference" number, the
tools shown are alternates to each other within the same airplane series. Tool part numbers
that are replaced or non-procurable are preceded by "Opt:", which stands for Optional.
Reference Description
COM-1550 Meter - Bonding
(Part #: C15292, Supplier: 01014, A/P Effectivity: 737-ALL)
(Part #: M1, Supplier: 3AD17, A/P Effectivity: 737-ALL)
(Part #: M1B, Supplier: 3AD17, A/P Effectivity: 737-ALL)
(Part #: MODEL 1010-A, Supplier: 3AD17, A/P Effectivity: 737-ALL)
C. Consumable Materials
Reference Description Specification
D00633 Grease - Aircraft General Purpose BMS3-33
D. Location Zones
Zone Area
210 Subzone - Control Compartment - Body Station 178.00 to Body
Station 259.50
311 Area Aft of Pressure Bulkhead - Left
312 Area Aft of Pressure Bulkhead - Right
E. Access Panels
Number Name/Location
311BL Stabilizer Trim Access Door
F. Stabilizer Trim Motor Installation
SUBTASK 27-41-71-020-002
(1) Remove the cover from the mounting pad.
SUBTASK 27-41-71-160-001
(2) Make sure that the mating surfaces of the stabilizer trim motor [1] and the stabilizer trim actuator
[3] are clean.
SUBTASK 27-41-71-640-001
(3) Fill the internal spline of the stabilizer trim actuator [3] with grease, D00633.
SUBTASK 27-41-71-420-001
(4) Install the stabilizer trim motor [1]:
(a) Engage the splined shaft of the stabilizer trim motor [1] with the internal spline of the
stabilizer trim actuator [3].
(b) Install the bolts [4], washers [5], and nuts [6].
(c) Install the bolt [7], washer [8], and nut [9].
737-600/700/800/900
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊4(2)