曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

SUBTASK 27-41-82-730-003
(14) Do this task: Horizontal Stabilizer Trim Control System Friction Test, TASK 27-41-00-700-802.
SUBTASK 27-41-82-610-001
(15) Do this task: Horizontal Stabilizer Actuator Brake - Servicing, TASK 12-22-41-610-802.
NOTE: This lubrication procedure must be performed after the installation of any new
stabilizer trim actuator.
SUBTASK 27-41-82-730-004
(16) Do this task: Stabilizer Trim Wheel Free Movement Test, TASK 27-41-00-700-804.
SUBTASK 27-41-82-730-005
(17) Do this task: Stabilizer Electric Trim System Test, TASK 27-41-00-700-803.
G. Put the Airplane Back To Its Usual Condition
SUBTASK 27-41-82-410-001
(1) Install the cargo liners and floor panels that were removed for access to the idler pulleys.
SUBTASK 27-41-82-410-002
(2) Close this access panel:
Number Name/Location
112A Forward Access Door
SUBTASK 27-41-82-410-003
(3) Close this access panel:
Number Name/Location
311BL Stabilizer Trim Access Door
SUBTASK 27-41-82-480-003
(4) Remove the DO-NOT-OPERATE tags from the stabilizer trim control wheels.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-41-82
Page 417
Oct 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
STABILIZER TRIM CUTOUT SWITCHES - REMOVAL/INSTALLATION
1. General
A. This procedure has these tasks:
(1) A removal of a stabilizer trim cutout switch
(2) An installation of a stabilizer trim cutout switch.
B. The stabilizer trim cutout switch is referred to as the "cutout switch" in this procedure.
C. This procedure is applicable to the main cutout switch (S272) and autopilot cutout switch (S149).
TASK 27-41-91-000-801
2. Stabilizer Trim Cutout Switch Removal
(Figure 401)
A. Location Zones
Zone Area
212 Flight Compartment - Right
B. Prepare for the Removal
SUBTASK 27-41-91-860-007
(1) Open these circuit breakers and install safety tags:
F/O Electrical System Panel, P6-2
Row Col Number Name
B 10 C00207 FLIGHT CONTROL STAB TRIM CONT
D 10 C00840 FLIGHT CONTROL STAB TRIM ACTUATOR
C. Cutout Switch Removal
SUBTASK 27-41-91-010-001
(1) Loosen the screws [6] and pull the panel out from the control stand.
SUBTASK 27-41-91-020-001
(2) Disconnect the electrical terminal [7] from the back of the cutout switch [1].
SUBTASK 27-41-91-020-002
(3) Remove the cutout switch [1] from the panel:
(a) Remove the locknuts [2], lockwasher [5], switch guard [4], and locking ring [3] from the
cutout switch [1].
(b) Remove the cutout switch [1] from the back side of the panel.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-41-91
Page 401
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Stabilizer Trim Cutout Switch Installation
Figure 401/27-41-91-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-41-91
Page 402
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-41-91-400-801
3. Stabilizer Trim Cutout Switch Installation
(Figure 401)
A. References
Reference Title
27-41-91-700-801 Main Cutout Switch Test (P/B 501)
27-41-91-700-802 Autopilot Cutout Switch Test (P/B 501)
B. Location Zones
Zone Area
212 Flight Compartment - Right
C. Procedure
SUBTASK 27-41-91-420-001
(1) Install the cutout switch [1] on the panel:
(a) Install the cutout switch [1] on the back side of the panel.
(b) Install the locknuts [2], locking ring [3], switch guard [4], and lockwasher [5].
NOTE: The cutout switch [1], locking ring [3], and switch guard [4] are all keyed for
correct installation.
SUBTASK 27-41-91-420-002
(2) Connect the electrical terminal [7] to the back of the cutout switch [1].
SUBTASK 27-41-91-420-003
(3) Install the panel on the control stand:
(a) Put the panel in its position on the control stand.
(b) Tighten the screws [6].
SUBTASK 27-41-91-860-008
(4) Remove the safety tags and close these circuit breakers:
F/O Electrical System Panel, P6-2
Row Col Number Name
B 10 C00207 FLIGHT CONTROL STAB TRIM CONT
D 10 C00840 FLIGHT CONTROL STAB TRIM ACTUATOR
SUBTASK 27-41-91-820-001
(5) For the main cutout switch, do this task: Main Cutout Switch Test, TASK 27-41-91-700-801.
SUBTASK 27-41-91-820-002
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊4(20)