曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

that are more than 0.05 inch (1.3 millimeters).
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-21
Page 416
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-51-21-420-003
(5) Connect the aft flap drive rods [11] to the drive rod attach fittings [10] (Figure 401):
(a) Move the aft flap drive rod [11] to its position on the drive rod attach fitting [10].
(b) Apply a layer of grease, D00633 to the inside of the bushing [6] and the shank of the bolt [4].
(c) Install the bushing [6], bolt [4] and washer [5] to attach the aft flap drive rod [11] to the drive
rod attach fitting [10].
NOTE: Install the bolt [4] with the head on the inboard side.
(d) Carefully clean the grease, D00633 from the threads of the bolt [4]
(e) Install the washer [7] and nut [8] on the bolt [4].
(f) Tighten the nut [8] to 65-100 pound-inches (7.4-11.2 newton-meters).
(g) Install the cotter pin [9] in the nut [8].
SUBTASK 27-51-21-420-004
(6) Connect the skew control rods [3] to the inboard carriage [13] and the outboard carriage [13]:
(a) Apply compound, C00913 to the shank and threads of the bolts [14].
(b) Move the skew control rod [3] to its position on the carriage [13].
(c) Install the bolts [14], washers [15], bushings [16], washers [17] and nuts [18] that attach the
skew control rod [3] to the carriage [14].
NOTE: Install the bolts [14] with the heads toward the center of the track.
SUBTASK 27-51-21-820-001
(7) Do this task: Outboard Trailing Edge Flap Adjustment, TASK 27-51-21-820-801.
NOTE: This task will include the installation of the deflection control roller assembly [29].
I. Put the Airplane Back to Its Usual Condition
SUBTASK 27-51-21-410-001
(1) Install these access panels, below the roller assembly [29]:
Number Name/Location
571AB Lower Outboard Fixed Trailing Edge Access Panel
at Deflector Rib
671AB Lower Outboard Fixed Trailing Edge Access Panel
SUBTASK 27-51-21-410-002
(2) Do this task: Outboard Flap Outboard Support Aft Fairing Installation, TASK 27-51-28-400-802.
SUBTASK 27-51-21-410-003
(3) Do this task: Outboard Flap Inboard Support Aft Fairing Installation, TASK 27-51-28-400-804.
SUBTASK 27-51-21-440-001
(4) Do this task: Trailing Edge Flap System Reactivation, TASK 27-51-00-440-801.
SUBTASK 27-51-21-860-002
(5) If the trailing edge flaps are not in the retracted position, do this task: Retract the Trailing Edge
Flaps, TASK 27-51-00-860-804.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-21
Page 417
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Outboard Trailing Edge Flap Shim Adjustment
Figure 403 (Sheet 1 of 2)/27-51-21-990-808
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-21
Page 418
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Outboard Trailing Edge Flap Shim Adjustment
Figure 403 (Sheet 2 of 2)/27-51-21-990-808
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-21
Page 419
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
OUTBOARD TRAILING EDGE FLAP - ADJUSTMENT/TEST
1. General
A. This procedure has an adjustment of the outboard trailing edge flap.
B. This procedure includes the adjustment of the main flap with the aft flap with the aft flap either
removed or installed.
C. The adjustment instructions included in this procedure are included in the Rigging Diagram - Inbd
and Outbd Flaps, Wing Trailing Edge 113A3017.
TASK 27-51-21-820-801
2. Outboard Trailing Edge Flap Adjustment
A. References
Reference Title
27-09-71-820-801 Trailing Edge Flap Adjustment for Lateral Trim (P/B 501)
27-51-00-040-801 Trailing Edge Flap System Deactivation (P/B 201)
27-51-00-440-801 Trailing Edge Flap System Reactivation (P/B 201)
27-51-00-860-803 Extend the Trailing Edge Flaps (P/B 201)
27-51-00-860-804 Retract the Trailing Edge Flaps (P/B 201)
27-51-28-000-802 Outboard Flap Outboard Support Aft Fairing Removal (P/B 401)
27-51-28-000-804 Outboard Flap Inboard Support Aft Fairing Removal (P/B 401)
27-51-28-400-802 Outboard Flap Outboard Support Aft Fairing Installation (P/B 401)
27-51-28-400-804 Outboard Flap Inboard Support Aft Fairing Installation (P/B 401)
B. Consumable Materials
Reference Description Specification
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊4(134)