(4)
 Put the adjustable access platform in position below the applicable access panel to be removed.

 Subtask 57-41-37-865-075
 B. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FLIGHT CONTROLS/SLT/CTL AND MONG/SYS1 5CV B06 121VU FLIGHT CONTROLS/SLT/CTL/SYS2 7CV R21
 4. Procedure
_________ (Ref. Fig. 403/TASK 57-41-37-991-023) Subtask 57-41-37-020-056
 A. Removal of the Access Panels NOTE : On many of the access panels, the screws that retain the panels
____ have different lengths. Make a record of the position of each screw as it is removed.
 (1) For the panel 522FB(622FB):
 (a)
 Hold the panel (1). Remove the four screws (2) and the screws (3).

 (b)
 Carefully remove the panel (1).

 1EFF : ALL 1 57-41-37Page 432 1 1 Aug 01/04R 1 1 1CES 1

 INTENTIONALLY BLANK

R 1 1

57-41-37Page 433
1 1 Aug 01/04 1 1 1CES 1

 Access Panels - Location and Detail Figure 403/TASK 57-41-37-991-023- 14 (SHEET 1)
 1EFF : 1 1R 1CES  ALL  1 11 1 57-41-37 Page 434 Aug 01/04

 Access Panels - Location and Detail Figure 403/TASK 57-41-37-991-023- 24 (SHEET 2)
 1EFF : 1 1R 1CES  ALL  1 11 1 57-41-37 Page 435 Aug 01/04

 Access Panels - Location and Detail Figure 403/TASK 57-41-37-991-023- 34 (SHEET 3)
 1EFF : 1 1R 1CES  ALL  1 11 1 57-41-37 Page 436 Aug 01/04

 Access Panels - Location and Detail Figure 403/TASK 57-41-37-991-023- 44 (SHEET 4) 
R 1EFF : 1 1 1CES  ALL  1 111 57-41-37 Page 437 Aug 01/04

 (2)
 For the panel 522JB(622JB):

 (a)
 Hold the panel (4) and remove the screws (5).

 (b)
 Remove the bolt (6) from the lanyard and carefully remove the panel (4).

 (3)
 For the panel 522KB(622KB):

 (a)
 Hold the panel (7). Remove the three screws (8) and the screws (9).

 (b)
 Carefully remove the panel (7).

 (4)
 For the panel 522LB(622LB):

 (a)
 Hold the panel (10). Remove the three screws (11) and the screws (12).

 (b)
 Carefully remove the panel (10).

 (5)
 For the panel 522NB(622NB):

 (a)
 Hold the panel (13). Remove the five screws (14) and the screws (15).

 (b)
 Carefully remove the panel (13).

 (6)
 For the panel 522QB(622QB):

 (a)
 Hold the panel (16). Remove the five screws (17) and the screws (18).

 (b)
 Carefully remove the panel (16).

 (7)
 For the panel 522SB(622SB):

 (a)
 Hold the panel (19). Remove the four screws (20) and the screws (21).

 (b)
 Carefully remove the panel (19).

 (8)
 For the panel 522UB(622UB):

 (a) Hold the panel (22). Remove the two screws (23) and the screws (24).
R 1EFF : ALL 1 57-41-37Page 438 1 1 Aug 01/04 1 1 1CES 1

 (b) Carefully remove the panel (22).

 1EFF : ALL 1 57-41-37Page 439 1 1 Aug 01/04R 1 1 1CES 1

 TASK 57-41-37-400-006

 Installation of the Access Panels 522FB(622FB), 522JB(622JB), 522KB(622KB), 522LB(622LB), 522NB(622NB), 522QB(622QB), 522SB(622SB), 522UB(622UB)
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
 GEAR.

 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
 START A TASK ON OR NEAR:

 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific adjustable access platform
 No specific non-metallic scraper
 No specific safety barriers
 No specific warning notice
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINGS 機翼2(139)