(3)
Install the No. 3 and the No. 4 Flap-Track movable fairings (Ref. TASK 57-55-11-400-004).
**ON A/C ALL
Subtask 27-54-55-942-056
C. Removal of Equipment
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Remove the safety barriers.
(3)
Remove the warning notice(s).
(4)
Remove the access platform(s).
(5)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
INBOARD FLAP - REMOVAL/INSTALLATION
___________________________________
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
TASK 27-54-61-000-001
Removal of the Inboard Flap
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:
_______
-
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.
-
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.
-MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific adhesive tape
No specific blanking caps
No specific covers
No specific flat support structure
No specific safety barriers
No specific warning notice
No specific access platform 3 m (9 ft. 10 in.)
98D27504030001 1 LOCK-TORQUE SHAFT (FLAPS AND SLATS) WITH CLAMP-PIVOT R 98D27504035000 1 TORQUE ADAPTOR-TRUNNION NUT
98D27504084000 1 EXTRACTOR - PIN
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
98D27803500001 1 TOOL-ZERO LOCKING, FLAP SLAT CTL LEVER
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
27-50-00-000-002 Removal of the Inboard and Outboard Flap Hoisting-Sling 27-50-00-400-002 Installation of the Inboard and Outboard Flap Hoisting-Sling 27-50-00-400-003 Installation of the Lock-Torque Shaft - Flaps and
Slats (98D27504030001) 27-50-00-866-009 Retraction of the Flaps on the Ground 27-50-00-866-011 Manual Extension of the Flaps 27-54-61-000-002 Removal of the Flap Kink-Seals 27-60-00-866-002 Extension-Retraction of the Spoilers for Maintenance 54-55-00-000-001 Removal of the Aft Movable Fairing 57-55-11-010-001 To Lower the Flap Track No. 2 Movable Fairing for
Access
**ON A/C 001-001, 051-052,
27-54-61-991-001 Fig. 401
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
Post SB 27-1117 For A/C 001-001,051-052,
27-54-61-991-001-A Fig. 401A
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
27-54-61-991-012 Fig. 402
**ON A/C 001-049, 051-099, 101-105, 151-158, 201-210,
27-54-61-991-005 Fig. 403
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 27-54-61Page 402 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R **ON A/C 106-149, 159-199, 211-299, 401-499,
R 27-54-61-991-005-B Fig. 403A **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
27-54-61-991-006 Fig. 404 27-54-61-991-013 Fig. 405 **ON A/C 001-049, 051-061, 101-103, 201-203,
R 27-54-61-991-007 Fig. 406 **ON A/C 062-099, 104-149, 151-199, 204-299, 401-499,
R 27-54-61-991-007-A Fig. 406A **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
27-54-61-991-049 3. Job Set-up__________ Subtask 27-54-61-941-050 Fig. 407
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護(hù)手冊 AMM FLIGHT CONTROLS 飛行操縱6(17)
