(2)
 Remove the warning notice(s).

 (3)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 1EFF : ALL 1 27-64-41Page 436 1 1 Aug 01/04R 1 1 1CES 1

 SPOILER 1 - INSPECTION/CHECK
____________________________ TASK 27-64-41-200-001 Inspection/Check of the Spoiler 1 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE. WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:
_______
 -
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.

 -
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.

 -MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
 1.
 Reason for the Job

__________________
 Because the free movement is more than that in TASK 27-64-00-200-001.

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers No specific warning notice
 1EFF : ALL 1 27-64-41Page 601 1 1 Feb 01/03R 1 1 1CES 1

 B. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
27-64-41-000-001 Removal of the Spoiler 1
 27-64-41-400-001 Installation of the Spoiler 1
 **ON A/C 001-003, 051-052,
 27-64-41-991-003 Fig. 601 R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 401-499,
 27-64-41-991-003-A Fig. 601A
 **ON A/C 301-399,
 27-64-41-991-003-B Fig. 601B
 **ON A/C ALL
 3. Job Set-up
__________
 Subtask 27-64-41-941-054

 A. Safety Precautions
 (1)
 Put the safety barriers in position.

 (2)
 Put a warning notice in position to tell persons not to operate the flight controls.

 Subtask 27-64-41-010-051
 B. Get Access
 (1) Remove the spoiler 1 (Ref. TASK 27-64-41-000-001).

 4. Procedure
_________
 **ON A/C 001-003, 051-052,

 (Ref. Fig. 601/TASK 27-64-41-991-003) R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 401-499,
 (Ref. Fig. 601A/TASK 27-64-41-991-003-A)
 **ON A/C 301-399,

 (Ref. Fig. 601B/TASK 27-64-41-991-003-B)
 **ON A/C ALL

 CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING
_______
 EDGE:

 -
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.

 -
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.

 -MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
 Subtask 27-64-41-220-051
 A. Dimensions of the Spoiler 1 NOTE : Limits on chrome plated items only apply when there is a layer of
____
 chrome remaining on the bearing surfaces.

 (1) Complete an inspection of these dimensions.

 Spoiler 1
 Figure 601/TASK 27-64-41-991-003- 12 (SHEET 1)

R 1EFF : 001-003, 051-052, 1 27-64-41Page 604 1 1 May 01/05 1 1 1CES 1

 Spoiler 1
 Figure 601/TASK 27-64-41-991-003- 22 (SHEET 2)

R 1EFF : 001-003, 051-052, 1 27-64-41Page 605 1 1 May 01/05 1 1 1CES 1

 Spoiler 1 Figure 601A/TASK 27-64-41-991-003-A
R 1EFF : 004-049, 053-099, 101-149, 151-199, 1 27-64-41Page 606 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1

R  Spoiler 1 
R  Figure 601B/TASK 27-64-41-991-003-B 
R 1EFF :  301-399,  1  27-64-41 Page 607 
1  1  May 01/04
 1  1
 1CES  1

 -------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 19.030 | 19.043 | | | 19.000 | | | | OD 2 |(0.7492) |(0.7497) | | |(0.7480) | | | | | | | 0.007 | 0.053 | | | 0.113 | | | | | (0.0002)| (0.0020)| | |(0.0044)| | B | 19.050 | 19.083 | | | | 19.113 | | | ID 1 |(0.7500) |(0.7512) | | | |(0.7524) | | -------------------------------------------------------------------------------
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱6(130)