Subtask 27-64-43-220-055
 E. Dimensions of the Spoiler 3
 NOTE : Limits on chrome plated items only apply when there is a layer of
____
 chrome remaining on the bearing surfaces.

 (1) Complete an inspection of these dimensions.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 19.030 | 19.043 | | | 19.000 | | | | OD 3 |(0.7492) |(0.7497) | | |(0.7480) | | | | | | | 0.007 | 0.053 | | | 0.113 | | | | | (0.0002)| (0.0020)| | |(0.0044)| | C | 19.050 | 19.083 | | | | 19.113 | | | ID 5 |(0.7500) |(0.7512) | | | |(0.7524) | | -------------------------------------------------------------------------------
Subtask 27-64-43-220-056
 F. Dimensions of the Spoiler 3
 NOTE : Limits on chrome plated items only apply when there is a layer of
____
 chrome remaining on the bearing surfaces.

 (1) Complete an inspection of these dimensions.
 1EFF : ALL 1 27-64-43Page 609 1 1 Feb 01/03R 1 1 1CES 1

 -------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 22.152 | 22.185 | | | 22.102 | | | | OD 5 |(0.8721) |(0.8734) | | |(0.8701) | | | | | | | 0.027 | 0.073 | | | 0.173 | | | | | (0.0010)| (0.0028)| | |(0.0068)| | C | 22.212 | 22.225 | | | | 22.275 | | | ID 6 |(0.8744) |(0.8750) | | | |(0.8769) | | -------------------------------------------------------------------------------
Subtask 27-64-43-220-057
 G. Dimensions of the Spoiler 3
 NOTE : Limits on chrome plated items only apply when there is a layer of
____
 chrome remaining on the bearing surfaces.

 (1) Complete an inspection of these dimensions.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | D | 28.534 | 28.555 | | | 28.493 | | | | OD 2 |(1.1233) |(1.1242) | | |(1.1217) | | | | | | | 0.020 | 0.062 | | | 0.144 | | | | | (0.0007)| (0.0024)| | |(0.0056)| | D | 28.575 | 28.596 | | | | 28.637 | | | ID 1 |(1.1250) |(1.1258) | | | |(1.1274) | | -------------------------------------------------------------------------------
1EFF : ALL 1 27-64-43Page 610 1 1 Feb 01/03R 1 1 1CES 1

 Subtask 27-64-43-220-058
 H. Dimensions of the Spoiler 3
 NOTE : Limits on chrome plated items only apply when there is a layer of
____
 chrome remaining on the bearing surfaces.

 (1) Complete an inspection of these dimensions.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | D | 20.959 | 20.980 | | | 20.918 | | | | OD 3 |(0.8251) |(0.8259) | | |(0.8235) | | | | | | | 0.020 | 0.062 | | | 0.144 | | | | | (0.0007)| (0.0024)| | |(0.0056)| | D | 21.000 | 21.021 | | | | 21.062 | | | ID 2 |(0.8267) |(0.8275) | | | |(0.8292) | | -------------------------------------------------------------------------------
Subtask 27-64-43-220-059
 J. Dimensions of the Spoiler 3
 NOTE : Limits on chrome plated items only apply when there is a layer of
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊(cè) AMM FLIGHT CONTROLS 飛行操縱6(160)