曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

R  **ON A/C 301-399, 
R  Subtask 27-64-41-020-050-B 
R  A. Removal of the Spoiler 1 
R  (Ref. Fig. 401B/TASK 27-64-41-991-001-B) 
R  (1) Remove the nuts (49), the washers (50) and the bolts (47) to 
R  disconnect the bonding straps (48) from each end of the spoiler 1. 
R  (2) Remove the nuts (19), (36), (39) and (51) and the locking plates 
R  (20), (37), (40) and (52). 
R  (3) Remove the spacer (38) and the bolt (28). 
R  (4) Remove the items that follow: 
R  (a) Remove and discard the cotter pin (1) from the locking cap (2). 
R  (b) Remove the locking cap (2), the nut (3) and the washer (4). Do 
R  not remove the hinge pin (7). 
R  (c) Remove and discard the cotter pins (27) and (29) from the locking 
R  caps (26) and (30). 
R  (d) Remove the locking caps (26) and (30), the nuts (25) and (31) and 
R  the washers (24) and (32). 
R  (e) Remove and discard the cotter pins (46) and (59) from the locking 
R  caps (45) and (58). 
R  (f) Remove the locking caps (45) and (58), the nuts (44) and (57) and 
R  the washers (43) and (56). 
R  (5) Do not remove the hinge pins (21), (35), (41) and (53). 
R  (6) Prepare the spoiler 1 for removal: 
R  CAUTION : SUPPORT THE SERVO CONTROL 7.5kg (16.5lb) AND THE SPOILER_______ 
R  APPROXIMATELY 15kg (33lb). THIS WILL PREVENT DAMAGE TO: 
R  - THE HYDRAULIC LINES 
R  - THE ELECTRICAL CABLES 
R  - THE STRUCTURE. 

R 1EFF : 301-399, 1 27-64-41Page 417 1 1 May 01/04 1 1 1CES 1

R  (a) Put the spoiler 1 and the actuator on supports. Remove the hinge 
R  pin (7) from the actuator eye-end (9). Collect the thrust washer 
R  (8) and the sliding bushes (5) and (6). Carefully lower the 
R  actuator. 
R  (7) Leave the supports in place below the spoiler. Remove the hinge pins 
R  (21), (35), (41) and (53). Collect the sliding bushes (22), (34), 
R  (42), (54) and (55) and the flanged bushes (23) and (33). 
R  (8) Remove the spoiler from the wing. 

R 1EFF : 301-399, 1 27-64-41Page 418 1 1 May 01/04 1 1 1CES 1

 **ON A/C ALL

 TASK 27-64-41-400-001
 Installation of the Spoiler 1
 WARNING : MAKE SURE THAT THE FLIGHT CONTROL SAFETY-LOCKS AND THE WARNING
_______
 NOTICES ARE IN POSITION.

 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
 GEAR.

 CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:
_______
 -
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.

 -
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.

 -MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific safety barriers
 No specific supports
 No specific warning notice

R No specific Torque Wrench : range 0.00 to 1.20 m.daN R (0.00 to 9.00 lbf.ft) No specific Torque Wrench : range 0.20 to 3.60 m.daN
 (2.00 to 26.00 lbf.ft) No specific Torque Wrench : range 1.00 to 10.00 m.daN
 (8.00 to 75.00 lbf.ft) SL90-313-4375 1 TOOL - INSTALLATION, TAB-WASHERS STA-LOK NSA5454 SL90-313-6250 1 TOOL- INSTALLATION, TAB WASHERS STA-LOK NSA5454 SL90-313-7500 1 TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 SL90-315-4375 1 WRENCHES - NOTCHED, TIGHTENING OF NUTS NSA5454 SL90-315-6250 1 WRENCHES - NOTCHED, TIGHTENING OF NUTS NSA5454 SL90-315-7500 1 WRENCHES - NOTCHED, TIGHTENING OF NUTS NSA5454 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------

98D27603002000 2 SPOILER MAINTENANCE KEY 98D27603002001 2 SPOILER MAINTENANCE KEY
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱6(123)