(b)
 Prepare the screws for installation. WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE

_______ SPECIAL MATERIAL. THIS MATERIAL IS DANGEROUS.
 1 Apply the SEALANTS (Material No. 09-018) to the screws (4).
_
R 1EFF : 051-099, 106-149, 151-199, 204-299, 1 55-32-11Page 417 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1 (c) Install and TORQUE the screws (4) to between 0.4 and 0.5 m.daN

 (35.39 and 44.24 lbf.in) and make sure that the bonding is correct (Ref. TASK 20-28-00-912-004).
 (6)
 Make sure the clearance "A" between the leading edge panels is 1 +3 -0 mm (0.0393 +0.1181 -0.0000 in.).

 (7)
 Remove the sling.

 (8)
 Remove the hoist fittings.

 (9)
 Install the plastic plugs in the hoisting points. NOTE : The plastic plugs must make a smooth surface with the leading

____
 edge contour.

 (10)
 Install the self-adhesive PVC disks, SPECIAL MATERIALS (Material No. 05-052) on the hoisting points.

 (11)
 Apply sealant around the leading edge section. WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE

_______
 SPECIAL MATERIAL.
 THIS MATERIAL IS DANGEROUS.

 (a) Apply the SEALANTS (Material No. 09-016) to the clearance around the leading edge section (3). Make a smooth contour with the panel and the spar box.
 **ON A/C ALL
 5. Close-up
________ Subtask 55-32-11-410-052
 A. Close Access
 (1)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 (2)
 Remove the crane.
 Remove the warning notice(s).

 (3)
 Remove the access platform(s).

 1EFF : ALL 1 55-32-11Page 418 1 1 May 01/05R 1 1 1CES 1

 Subtask 55-32-11-865-052

 B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 5CC1, 5CC2, 14CC1, 14CC2, 15CC, 15CE1, 15CE2, 16CE1, 16CE2, 19CE1, 19CE2, 19CE3, 22CE, 21CE1, 21CE2, 21CE3 LEADING EDGE - VERTICAL STABILIZER - CLEANING/PAINTING

______________________________________________________
 TASK 55-32-11-100-001
 Prepare the Vertical - Stabilizer Leading - Edge for Anti-erosion Protection Application
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific warning notice
 No specific Lint free cloth
 No specific access platform 11.0 m (36 ft. 1 in.)

 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-065 C Z-24.380
 EROSION PROTECTIVE TAPE (Ref. 20-31-00)
 Material No. 08-017A USA DOD-A-82720
 ADHESIVE STRUCTURAL FLEXIBLE (Ref. 20-31-00)

 Material No. 11-002  USA MIL-PRF-680
 DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT)
 (Ref. 20-31-00)

R Material No. 11-003 USA ASTM D 740 METHYL-ETHYL-KETONE (Ref. 20-31-00) Material No. 16-031 C Z-12.541 ANTI-EROSION PAINT (Ref. 20-31-00) Material No. 19-003 USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00) Material No. 19-011 SCOTCH BRITE PADS (Ref. 20-31-00)

 C. Referenced Information

 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
29-10-00-864-001 Depressurize the Green Hydraulic System
 29-10-00-864-002 Depressurize the Yellow Hydraulic System
 29-10-00-864-003 Depressurize the Blue Hydraulic System
 51-75-12-300-001 Repair of Major Paint Damage on Light Alloy and

 Composite Material R ASRM 51-75-12-001 55-32-11-991-002 Fig. 701
 3. Job Set-up
__________
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE
_______
 YOU START A TASK ON OR NEAR:

 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 Subtask 55-32-11-865-054
 A. Open, safety and tag this(these) circuit breaker(s):
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM STABILIZERS 安定面(84)