C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
23-61-41-400-001 Installation of the Static Discharger
 27-34-41-400-001 Installation of the Elevator
 29-10-00-864-001 Depressurize the Green Hydraulic System
 29-10-00-864-002 Depressurize the Yellow Hydraulic System
 29-10-00-864-003 Depressurize the Blue Hydraulic System
 55-14-11-400-001 Installation of the Tips 332AB/342AB
 55-24-11-991-001 Fig. 401

 3. Job Set-up
__________
 Subtask 55-24-11-860-051
 A. Aircraft Maintenance Configuration
 (1) Make sure that the hydraulic system is depressurized (Ref. TASK 29-10-00-864-001), (Ref. TASK 29-10-00-864-002), (Ref. TASK 29-10-00-864-003).
R (2) Make sure that the PIN-SIDE STICK LOCKING (98D27903500000) is in the CAPT and F/O side stick controllers.
R (3) Make sure that the TOOL-ELEVATOR NEUTRAL SETTING (98D27309001000) is R installed on the elevator.

 (4)
 Make sure that the warning notices are in the flight compartment to tell persons not to operate the flight controls.

 (5)
 Make sure that the warning notices are in position to tell persons not to operate the hydraulic systems.

 (6)
 Make sure that the access platforms are in position at zone 335 and/or zone 345.

 Subtask 55-24-11-865-054
 B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FLIGHT CONTROLS/ELAC1/NORM/SPLY 15CE1 B11 49VU FLIGHT CONTROLS/THS/ACTR/MOT2 19CE2 B09 105VU FLIGHT CONTROLS/ELAC2/STBY SPLY 16CE2 A02 105VU FLT CTL/ELAC1/STBY SPLY 16CE1 A01 121VU FLIGHT CONTROLS/THS ACTR/MOT3 19CE3 Q17 121VU FLIGHT CONTROLS/THS ACTR/MOT1 19CE1 Q16 121VU FLIGHT CONTROLS/ELAC2/NORM/SPLY 15CE2 R20
 4. Procedure_________
 (Ref. Fig. 401/TASK 55-24-11-991-001)
 Subtask 55-24-11-420-050
 A. Installation
 (1) Install the Elevator Tips.
 (a)
 Apply SEALANTS (Material No. 09-005) and SPECIAL MATERIALS (Material No. 05-013) along the mating surfaces.

 (b)
 Put the elevator tips (2) in position.

 (c)
 Install the screws (1).

 (d)
 If removed, install the horizontal stabilizer tips 332AB and 342AB (Ref. TASK 55-14-11-400-001).

 (e)
 Apply SEALANTS (Material No. 09-001) to the gaps between the tips and the elevator skin panels.

 1EFF : ALL 1 55-24-11Page 411 1 1 Nov 01/02R 1 1 1CES 1

 (f) Install the static dischargers (4) (Ref. TASK 23-61-41-400-001).
 (2) Install the Elevator End Caps.
 (a)
 Use CLEANING AGENTS (Material No. 11-004) and clean lint free cloth to clean the elevator and end cap interface.

 (b)
 Make sure that the surfaces are clean and all the old sealant is removed.

 (c)
 Apply SEALANTS (Material No. 09-005) and separator agent SPECIAL MATERIALS (Material No. 05-013) along the mating surfaces.

 (d)
 Put the elevator end caps (3) in position.

 (e)
 Install the screws (1).

 (f)
 Apply SEALANTS (Material No. 09-001) to the gaps between the elevator end caps and the elevator skin skin panels.

 (g)
 Install the applicable elevator (Ref. TASK 27-34-41-400-001).

 5. Close-up
________
 Subtask 55-24-11-942-051

 A. Remove Ground Equipment
 (1)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 (2)
 Remove the warning notice(s).

 (3) Remove the access platform(s).
 Subtask 55-24-11-081-050

 B. Remove Locking Devices
R (1) Remove the PIN-SIDE STICK LOCKING from the CAPT and F/O side stick
R controllers.
R (2) Remove the SETTING TOOL-NEUTRAL, ELEVATOR from the elevators.

 Subtask 55-24-11-865-051

 C. Make sure that this(these) circuit breaker(s) is(are) closed: 15CE1, 19CE2, 16CE1, 16CE2, 19CE3, 19CE1, 15CE2

 ELEVATOR ATTACH FITTINGS - DESCRIPTION AND OPERATION
____________________________________________________
 1.
 General

_______ Six elevator attach fittings and two actuator attach fittings are riveted on the front spar of each elevator.