(b)
Install the trailing edge access-panels 325EL, 325ER (Ref. TASK 55-33-13-400-001).
(c)
Install the vertical stabilizer tip (Ref. TASK 55-34-11-400-001).
(d)
Remove the warning notices from the aircraft.
(e)
Remove the access platform(s).
(f)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
R **ON A/C 106-149, 159-199, 211-299, 301-399, 401-499,
Subtask 55-36-41-410-054-A
C. Close Access
(1) Close the access of the hinge arm fitting No. 7.
(a)
Make sure that the work area is clean and clear of tool(s) and other items.
(b)
Install the trailing edge access-panels 325EL, 325ER (Ref. TASK 55-33-13-400-001).
(c)
Install the access panel 326CT at the rudder attach fitting No. 7 (Ref. TASK 55-42-13-400-001).
R (d) Install the vertical stabilizer tip (Ref. TASK 55-34-11-400-001).
R (e) Remove the warning notices from the aircraft.
R (f) Remove the access platform(s).
R R (g) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
R **ON A/C ALL
Subtask 55-36-41-865-054
D. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 19CE1, 19CE2, 19CE3, 15CE1, 15CE2, 21CE1, 21CE2, 21CE3, 5CC1, 14CC1, 14CC2, 15CC, 16CE1, 16CE2
SUPPORT STRUT - RUDDER - REMOVAL/INSTALLATION
_____________________________________________
TASK 55-36-48-000-001
Removal of the Rudder Support Strut
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL SURFACES ARE
_______
CLEAR BEFORE YOU PRESSURIZE/DEPRESSURIZE A HYDRAULIC SYSTEM.
1. Reason for the Job
__________________
-
to inspect and/or to replace the rudder bearing No. 6,
-
to remove/install the rudder,
-
to remove/install the rudder hinge arm fitting No. 6.
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific groove nut wrench
No specific warning notices
No specific access platform 10.5 m (34 ft. 5 in.)
98D27207508000 1 FIXTURE - VERT. STABILIZER/RUDDER
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
29-00-00-864-001 Put the Related Hydraulic System in the Depressurized
Configuration before Maintenance Action R 55-33-13-010-002 Opening/Removal of the Trailing Edge Access-Panels R 325EL, 325ER, 325DL, 325DR, 325CL, 325CR, 325BL and R 325BR
55-36-48-991-001 Fig. 401
3.
Job Set-up
__________
4.
Procedure
Subtask 55-36-48-865-050
A. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU FLIGHT CONTROLS/ELAC1/NORM/SPLY 49VU FLIGHT CONTROLS/THS/ACTR/MOT2 49VU FLIGHT CONTROLS/SEC1/NORM/SPLY 49VU AUTO FLT/FAC1/28VDC 49VU AUTO FLT/FAC1/26VAC 105VU FLIGHT CONTROLS/ELAC2/STBY SPLY 105VU FLT CTL/ELAC1/STBY SPLY 105VU FLT CTL/SEC1/STBY SPLY 121VU AUTO FLT/RUDDER/TRIM/IND 121VU AUTO FLT/FAC2/28VDC 121VU AUTO FLT/FAC2/26VAC 121VU FLIGHT CONTROLS/SEC3/SPLY 121VU FLIGHT CONTROLS/SEC2/SPLY 121VU FLIGHT CONTROLS/THS ACTR/MOT3 121VU FLIGHT CONTROLS/THS ACTR/MOT1 121VU FLIGHT CONTROLS/ELAC2/NORM/SPLY 15CE1 19CE2 21CE1 5CC1 14CC1 16CE2 16CE1 22CE 15CC 5CC2 14CC2 21CE3 21CE2 19CE3 19CE1 15CE2 B11B09B08B04B03A02A01B01M20M19M18Q19Q18Q17Q16R20
Subtask 55-36-48-864-050
B. Depressurize the Green, Yellow and Blue hydraulic systems (Ref. TASK 29-00-00-864-001).
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM STABILIZERS 安定面(102)
