曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

( ) Scheduling information for (      ) aircraft instruments, including recommended periods for (  ) cleaning, ( ) inspecting, (      ) adjusting, (      ) testing, and ( ) lubricating; and ( ) the work recommended at these periods.  G23.3(b)(1) 
( ) Scheduling information for (      ) aircraft equipment, including recommended periods for (  ) cleaning, ( ) inspecting, (      ) adjusting, (      ) testing, and ( ) lubricating; and ( ) the work recommended at these periods.  G23.3(b)(1) 
( ) Degree of inspection for each part of the (     ) aircraft and its ( ) engines, ( ) the auxiliary power unit, (  ) propellers,  ( ) accessories, (  ) instruments, and (  ) equipment.  G23.3(b)(1) 
( ) Applicable wear tolerances.  G23.3(b)(1) 
Applicant may refer to an (  ) accessory, (     ) instrument, or ( ) equipment manufacturer as the source of this information if applicant shows ( ) that the item is exceptionally complex and requires specialized maintenance techniques, test equipment, or expertise.   G23.3(b)(1) 
( ) Recommended overhaul periods and necessary cross-references to the ALS.  G23.3(b)(1) 
( ) An inspection programme that includes (  ) the frequency and ( ) extent of the inspection necessary to provide for continued airworthiness .  G23.3(b)(1) 
( ) Troubleshooting information describing (      ) probable malfunctions, ( ) how to recognize those malfunctions, and ( ) remedies for them.  G23.3(b)(2) 
( ) Description of the order and method of (      ) removing and  ( ) replacing products (engines and propellers) with any precautions.  G23.3(b)(3) 
( ) Description of the order and method of (      ) removing and  ( ) replacing parts, with any precautions.  G23.3(b)(3) 
( ) Other instructions, including (     ) storage limitations and procedures for ( ) testing system during ground running, ( ) making symmetry checks, (  ) weighing and determining the center of gravity, (   ) lifting, and (      ) shoring.  G23.3(b)(4) 

INSTRUCTIONS FOR CONTINUED AIRWORTHINESS  (ICA) REQUIREMENTS  Regulation Appendix (sample reference)  Location In ICA 
( ) Diagrams of structural access plates and information needed to gain access for inspections when access plates are not provided.  G23.3(c) 
( ) Details for applying special inspection techniques, including radiographic and ultrasonic testing, where such processes are specified.  G23.3(d) 
( ) Information needed to apply protective treatment to structure after inspection.  G23.3(e) 
( ) All data on structural fasteners, such as (  ) identification, ( ) discard recommendations, and (  ) torque values.  G23.3(f) 
( ) List of special tools needed.  G23.3(g) 
( ) For Commuter Category aircraft:  electrical loads applicable to the various systems.  G23.3(h)(1) 
( ) For Commuter Category aircraft:  methods of balancing control surfaces.  G23.3(h)(2) 
( ) For Commuter Category aircraft:  identification of primary and secondary structures.  G23.3(h)(3) 
( ) For Commuter Category aircraft:  any special repair methods applicable.  G23.3(h)(4) 
( ) ICA must contain a section, titled Airworthiness Limitations, that is ( ) segregated and (  ) clearly distinguishable from the rest of the document.  NOTE: The appropriate CAA office will evaluate and approve the Airworthiness Limitations Section (ALS) in the applicant’s ICA.  G23.4 
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：適航手冊 AIRWORTHINESS MANUAL(47)