S 422-084
(1)
Do these steps to install the inboard elevator PCP filter:
(a)
Apply skydrol assembly lube on the packing (6), backup rings (5), and the fitting threads before the installation.
(b)
Install the new packing and backup rings on the clean filter element (1).
(c)
Install the filter element into the manifold hole.
(d)
Apply skydrol assembly lube on the packing (4), backup rings (3), and the threads of the filter cap (2).
(e)
Install the new packing and backup rings on the filter cap.
(f)
Attach the filter cap into the manifold assembly and tighten it to 400-450 pound-inches.
(g)
Apply a thin layer of sealant around the filter cap.
S 862-085
(2)
Remove the DO-NOT-CLOSE tags and close these circuit breakers:
(a)
P180, DC Power Distribution Panel
1) 180E7, ELEV/RUD VLV SYS 2
2) 180E22, ELEV/RUD VLV SYS 4
3) 180H8, ELEV/RUD VLV SYS 1
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-31-07
ALL ú ú 01 Page 223 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
4) 180H23, ELEV/RUD VLV SYS 3
S 862-086
(3)
Set all FLT CONTROL HYD POWER TAIL switches on the P461, Pilots' Overhead Maintenance Panel in NORM.
F.
Do an Operational Test of the Inboard Elevator PCP Filter
S 862-087
WARNING:_______ MOVE ALL PERSONS AND EQUIPMENT AWAY FROM THE RUDDERS AND THE
ELEVATORS BEFORE YOU PRESSURIZE THE HYDRAULIC SYSTEMS. THE
RUDDERS AND ELEVATORS CAN MOVE QUICKLY AND CAUSE INJURY TO
PERSONS OR DAMAGE TO EQUIPMENT.
(1)
Pressurize the hydraulic systems No. 1 and 2 (left inboard elevator), or 3 and 4 (right inboard elevator)(AMM 29-11-00/201).
S 712-088
(2)
Operate the elevators until the movement is smooth and continuous.
S 792-089
(3)
Examine the inboard elevator PCP for a hydraulic leak.
S 862-090
(4)
Do this task: "Remove Hydraulic Power" (AMM 29-11-00/201).
S 862-091
(5)
Remove the DO-NOT-CLOSE tags and close these circuit breakers:
(a)
P7, Overhead Circuit Breaker Panel 1) 7E7, L STAB TRIM S/O VLV 2) 7E20, R STAB TRIM S/O VLV
S 862-092
(6)
Set the STAB TRIM 2 and 3 switches on the control stand to ON.
S 612-093
(7)
Fill the hydraulic reservoirs if it is necessary (AMM 12-12-01/301).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-31-07
ALL ú ú 01 Page 224 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 747-400 MAINTENANCE MANUAL
(8) S 412-094Install the access panels (AMM 06-09-06/201).
(9) S 862-095If the electrical power is not necessary, do this task: Electrical Power" (AMM 24-22-00/201). "Remove
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-31-07
ALL ú ú 03 Page 225 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
INBOARD ELEVATOR POWER CONTROL PACKAGE - INSPECTION/CHECK
_________________________________________________________
1. General_______
A. This procedure has two tasks. The first task is an inspection of the power control package (PCP) to inboard elevator attachment fittings. The second task is an inspection of the inboard elevator control pushrods.
B. In the first task you measure the inner or outer diameter of the parts which attach the PCP to the attachment fittings. The parts include bearings, bushings and bolts.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 3(67)
