S 864-016
(3)
Set the rudder to the neutral position with the rudder trim switch on the control stand.
S 864-010
(4)
Set the FLT CONTROL HYD POWER TAIL switches on the P461, Pilots' Overhead Maintenance Panel to SHUTOFF.
(a)
Make sure that the four VALVE CLOSED lights come on.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-28-03
ALL ú ú 01 Page 401 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
Rudder Trim Indicator Installation
Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-28-03
ALL ú ú 01 Page 402 ú Jun 10/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A41730
A
747-400
MAINTENANCE MANUAL
S 864-002
(5)
Open these circuit breakers and attach DO-NOT-CLOSE tags:
(a)
P7, Overhead Circuit Breaker Panel
1) 7D16, RUDDER TRIM CONT
(b)
P6, Main Power Distribution Panel
1) 6J19, RUDDER TRIM IND
S 034-012
(6)
Remove the two fasteners that connect the rudder trim indicator to the aileron and rudder trim control module.
S 024-003
(7)
Remove the rudder trim indicator:
(a)
Disconnect the electrical connector DN308.
(b)
Remove the rudder trim indicator from the aileron and rudder trim control module.
TASK 27-28-03-404-004
3. Rudder Trim Indicator Installation (Fig. 401)
__________________________________
A. References
(1)
AMM 24-22-00/201, Manual Control
(2)
AMM 29-11-00/201, Main Hydraulic Supply System
(3)
SSM 27-21-01
(4)
WDM 27-28-13
B.
Access
(1)
Location Zone
221, 222 Control Cabin
C.
Procedure
S 424-005
(1)
Install the rudder trim indicator:
(a)
Connect the electrical connector DN308.
(b)
Install the rudder trim indicator to the aileron and trim control module with the two fasteners.
S 864-006
(2)
Remove the DO-NOT-CLOSE tags and close these circuit breakers:
(a)
P6, Main Power Distribution Panel
1) 6J19, RUDDER TRIM IND
(b)
P7, Overhead Circuit Breaker Panel
1) 7D16, RUDDER TRIM CONT
S 864-007
(3) Set the FLT CONTROL HYD POWER TAIL switches on the P461, Pilots' Overhead Maintenance Panel to NORM.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-28-03
ALL ú ú 05 Page 403 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 747-400 MAINTENANCE MANUAL
(4) S 864-009Make sure the rudder trim indicator is in the null position: (a) Turn the rudder trim switch until the rudder trailing edge is within the width of the index groove. (b) Alternately tap the left and right pedals lightly to "seat" the feel cam roller in its detent. (c) Make sure the rudder trim indicator is at the zero position.
(5) S 824-011If the rudder trim indicator is not at the null position, adjust the rudder trim indicator: (a) Set the FLT CONTROL HYD POWER TAIL switches on the P461, Pilots' Overhead Maintenance Panel to SHUTOFF. (b) Remove the two fasteners that attach the rudder trim indicator with the aileron and rudder trim control module.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 3(6)
