S 032-075

 (10)
 Remove the O-rings (14 and 15) and the retainers (22 and 23) from the shutoff valve (18).

 (a)  
Discard the O-rings and the retainers.

 TASK 27-41-04-402-076
 10. Motor Operated Shutoff Valve Installation_________________________________________
 A. Parts ~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 201 | 14 | Packing (O-ring) | 27-41-04 | 05 | 135 | | | 15 | Packing (O-ring) | | | 125 | | | 18 | Shutoff Valve | | | 115 | | | 20 | Bolt | | | 105 | | | 21 | Washer | | | 110 | | | 22 | Retainer | | | 130 | | | 23 | Retainer | | | 120 | 2......…........…...................................…...........….....…........1
 B. References
 (1)  
AMM 06-09-05/201, Body Section 48 Access Doors and Panels

 C.
Access

 (1)  
Location Zone
 311 Area Aft of Pressure Bulkhead, LH
 312 Area Aft of Pressure Bulkhead, RH

 (2)  
Access Panel 312A Horizontal Stabilizer Jackscrew Access Door

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-41-04
 ALL  ú ú 01 Page 216 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 D. Procedure
 S 422-078
 (1)  
Install the shutoff valve (18) (Fig. 201):

 (a)  
Install the O-rings (14 and 15) and the retainers (22 and 23) on the shutoff valve (18).

 (b)  
Install the shutoff valve (18) on the STCM (1).

 (c)  
Install the bolts (20) and the washers (21) that attach the shutoff valve (18) to the STCM (1).

 S 432-102
 (2)  
Connect the electrical connector DB188C or DB189C on the shutoff valve (18).

 S 862-103

 (3)
Remove the DO-NOT-CLOSE tags and close these circuit breakers:

 (a)  
P7, Overhead Circuit Breaker Panel
 1) 7E6, STAB TRIM L CONT
 2) 7E7, STAB TRIM L S/O VLV
 3) 7E19, STAB TRIM R CONT
 4) 7E20, STAB TRIM R S/O VLV

 S 862-104
 (4)  
Remove the DO-NOT-MOVE tags and set the STAB TRIM 2 and 3 switches to ON.

 S 862-120

 (5)  
Close the access door 312A (AMM 06-09-05/201).

 S 712-118

 (6)  
Do this task: "Operational Test - Motor Operated Shutoff Valve" (Ref Paragraph 11).

 TASK 27-41-04-702-121
 11. Operational Test - Motor Operated Shutoff Valve_______________________________________________
 A. References
 (1)  AMM 24-22-00/201, Manual Control
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-41-04
 ALL  ú ú 01 Page 217 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (2)  
AMM 29-11-00/201, Main Hydraulic Supply System

 B.
Access

 (1)  
Location Zone
 311 Area Aft of Pressure Bulkhead, LH
 312 Area Aft of Pressure Bulkhead, RH

 (2)  
Access Panel
 312A Horizontal Stabilizer Jackscrew Access Door

 C.
Procedure

 S 862-105
 (1)  
Do this task: "Supply Electrical Power" (AMM 24-22-00/201).

 S 862-106

 (2)  
Do this task: "Supply Hydraulic Power" (AMM 29-11-00/201).

 S 712-149

 (3)  
Do a test of the shutoff valves:

 (a)  
Make sure the two shutoff valves are closed: 1) Set the STAB TRIM 2 and 3 switches to CUTOUT. 2) Hold the STAB TRIM ALTN switches to APL NOSE UP. 3) Make sure the stabilizer position indicators on the control

 stand show no movement. 4) Hold the STAB TRIM ALTN switches to APL NOSE DN. 5) Make sure the stabilizer position indicators show no
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 3(165)