S 794-033
 S 584-034
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-41
 ALL  ú ú 02 Page 406 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 MAIN LANDING GEAR LOWER DRAG STRUT - INSPECTION/CHECK
_____________________________________________________
 1.  General
_______
 A.  This procedure only has illustration and a wear limits table which shows the data for wear limits. There are no procedures for the access, the removal, or the installation of the parts. Refer to the Main Landing Gear Lower Drag Strut - Removal/Installation for procedures to do these tasks.
 TASK 32-11-41-206-001
 2.  Wear Limits for the Lower Drag Strut of the Main Landing Gear (Fig. 601)
_____________________________________________________________
 A.  Wear Limits for the Lower Drag Strut
 S 226-002
 (1)  Refer to Fig. 601 for the inspection points and the wear limits table.

Main Landing Gear Lower Drag Strut Wear Limits
Figure 601 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-41
 ALL  ú ú 01 Page 601 ú Nov 15/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL

C-C Main Landing Gear Lower Drag Strut Wear Limits Figure 601 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-41
 ALL  ú ú 01 Page 602 ú Jul 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
NO. INDEX  PART NAME  DIM.  DESIGN LIMITS  WEAR LIMITS  WORN PART REPLACE  PART WORN REPAIR  INSTR REPAIR
DIAMETER  PER-MITTED WEARDIM.  DIA MAX ANCE CLEAR-
MIN  MAX 
1  BUSHING ID  1.500  1.501  1.503  0.005 X 
BOLT  OD  1.498  1.499  1.497  X  1 
2  BUSHING ID  1.500  1.501  1.503  0.005  X
BOLT  OD  1.498  1.499  1.497 X  1 
3  BUSHING  ID  1.7505  1.7515  1.7535  0.005  X
PIN  OD  1.7495  1.7500  1.7485  X  1 
4 BUSHING  ID  1.7505  1.7515  1.7535  0.005  X
PIN  OD  1.7495  1.7500  1.7485 X  1 
5  BUSHING  ID  1.7510  1.752  1.7535  0.005  X
PIN  OD  1.7495  1.7500  1.7485  X  1 
6 BUSHING  ID  1.501  1.502 1.503  0.005  X 
BOLT  OD 1.499 1.500  1.498  X  1 
7  BUSHING  ID  2.257 2  2.258 2  2.260  0.010  X 
BOLT  OD  2.251  2.252  2.250  X  1 
8  BUSHING  ID 1.375 1.376  1.378  0.005  X 
BOLT  OD  1.373  1.374  1.372  X  1 
9 BUSHING  ID 1.375  1.376  1.378  0.005  X 
BOLT  OD  1.373  1.374  1.372  X  1 
10  BUSHING  3  1.626  1.627  1.632  0.008  X 
BUSHING  4  1.624  1.625  1.619  X
11  BUSHING  5  3.625  3.627  3.632  0.008  X 
BUSHING  3  3.623  3.624  3.619  X
12  BUSHING  6  6.377  6.378  6.382  0.011  X 
BUSHING  5  6.375  6.376  6.371  X 
13  CLEARANCE TOTAL AXIAL  -- 0.010  0.016  -- 0.020 9 
14  BUSHING  5  3.687  3.688  3.691  0.008  X 
BUSHING  8  3.684  3.686  3.680  X

Main Landing Gear Lower Drag Strut Wear Limits
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 起落架 LANDING GEAR 1(87)