32-11-11
 ALL  ú ú 01 Page 427 ú Mar 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

737-300/400/500MAINTENANCE MANUAL
 MAIN LANDING GEAR TRUNNION LINK - INSPECTION/CHECK
__________________________________________________
 1.  General_______
 A.  This procedure only has illustration and a wear limits table which shows the data for wear limits. There are no procedures for the access, the removal, or the installation of the parts. Refer to the Main Landing Gear Trunnion Link - Removal/Installation for procedures to do these tasks.
 TASK 32-11-11-206-001
 2.  Wear Limits for the Trunnion Link of the Main Landing Gear (Fig./601)__________________________________________________________
 A.  Wear Limits for the Trunnion Link
 S 226-002
 (1)  Refer to Fig. 601 for the inspection points and the wear limits table.
ACTUATOR BEAM
ASSEMBLY

13. BUSHING/BUSHING
TRUNNION LINK ARM ASSEMBLY ACTUATOR BEAM ASSEMBLY
MAIN LANDING UPPER DRAG STRUT
GEAR SHOCK ATTACH BOLT
TRUNNION LINK
B
STRUT ASSEMBLY ASSEMBLY
A
B
2. BUSHING/BOLT  (2 LOCATIONS)A DRAG STRUT
ASSEMBLY
INBD FWDINBD
1. BUSHING/BOLT (2 LOCATIONS)
UPPER DRAG STRUT ASSEMBLY
A-A
Main Landing Gear Trunnion Link Assembly Wear Limits
Figure 601 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-11
 ALL  ú ú 01 Page 601 ú Nov 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-11
 ALL  ú ú 01 Page 602 ú Jul 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL

12. BUSHING/BOLT

12. BUSHING/BOLT(2 LOCATIONS) BOLT (2 LOCATIONS) BOLT
TRUNNION PIN
FWD

TRUNNION PINASSEMBLY ASSEMBLY
INBD BALL/BOLT
INBD  BALL/BOLT

FOR ASSEMBLIES USING 1" DIA BOLT FOR ASSEMBLIES USING 1.25" DIA BOLT D-D

D-D

Main Landing Gear Trunnion Link Assembly Wear Limits
Figure 601 (Sheet 3)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-11
 ALL  ú ú 01 Page 603 ú Mar 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
E32706
A

737-300/400/500
MAINTENANCE MANUAL

Main Landing Gear Trunnion Link Assembly Wear Limits
Figure 601 (Sheet 4)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-11
 ALL  ú ú 01 Page 604 ú Nov 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
E32738
A

737-300/400/500
MAINTENANCE MANUAL

Main Landing Gear Trunnion Link Assembly Wear Limits
Figure 601 (Sheet 5)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-11
 ALL  ú ú 01 Page 605 ú Nov 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
E32752
A

737-300/400/500
MAINTENANCE MANUAL

REFER TO OVERHAUL MANUAL FOR REPAIR INFORMATION MAXIMUM PLATING BUILD UP 0.010. REFER TO OVERHAUL MANUAL FOR PLATING INFORMATION DISTANCE BETWEEN FLANGE FACES OF BUSHINGS IN UPPER DRAG STRUT ASSEMBLY DISTANCE BETWEEN FLANGE FACES OF BUSHINGS IN TRUNNION LINK ASSEMBLY DISTANCE BETWEEN INNER LUG FACES ON SHOCK STRUT OUTER CYLINDER ASSEMBLY DISTANCE BETWEEN FLANGE FACES OF BUSHINGS IN ACTUATOR BEAM ARM ASSEMBLY DISTANCE BETWEEN FLANGE FACES OF BUSHINGS IN SHOCK STRUT OUTER CYLINDER ASSEMBLY DISTANCE BETWEEN FLANGE FACES OF BUSHINGS IN REACTION LINK UNIVERSAL ASSEMBLY DISTANCE BETWEEN FLANGE FACES OF BUSHINGS IN TRUNNION PIN ASSEMBLY USE 69-53852-1 IF AND AS REQUIRED. REMOVE 0.003 LAMINATIONS AS REQUIRED TO OBTAIN
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 起落架 LANDING GEAR 1(71)