(2)
GJ-5/PD-MD - Axle nut internal thread gage tool, Johnson Gage Co., Inc. (Optional)
(3)
Micrometer of appropriate size and accuracy, used to measure the major diameter of the axle thread.
(4)
Axle Nut NO-GO Gage Tool for minor diameter.
(a)
Plug Gage, Landing Gear Nut, F80198-12, used to examine the minor diameter of the axle nut with original configuration or equivalent vendor tool Class X, 2.8697 Go/2.8774 NoGo with handle.
(b)
Plug Gage, Landing Gear Nut, F80198-13, used to examine the minor diameter of the axle nut with undersized configuration or equivalent vendor tool Class X, 2.8141 Go/2.8163 NoGo with handle.
(5)
Axle Nut NO-GO Gage Tool for pitch diameter.
(a)
NO-GO Gage, 2-15/16-16 UNS 3B NoGo member only with handle, pitch diameter 2.9024, used to examine the pitch diameter of the axle nut with original configuration.
(b)
NO-GO Gage, 2-7/8-16 UNS 3B NoGo member only with handle, pitch diameter 2.8379, used to examine the pitch diameter of the axle nut with undersized configuration.
All the NO-GO gage tools, except for the F80198-XX, can be purchased from PRECISE TOOL and GAGE CO. INC., 13300 S.E. 30th St., Suite No. 201, Bellevue, WA 98005 USA Tel. No. (206) 746-1234/623-1120, Fax. No. (206) 747-8131.
B. Procedure
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-11-85
ALL ú ú 01 Page 601 ú Mar 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 226-004
CAUTION:_______ MAKE SURE THAT YOU ATTACH A LABEL WHICH READS "CAUTION -
SPECIAL AXLE NUT IS NECESSARY" ALONG THE UPPER OUTER END OF THE
AXLE SLEEVE ON THE AIRPLANES WITH REWORKED AXLES. THE LABEL
MUST HAVE YELLOW LETTERS ON A BLACK BACKGROUND. IF NO LABEL IS
ATTACH ON THE AXLE, THE INCORRECT AXLE NUT CAN BE INSTALLED.
THE INSTALLATION OF INCORRECT AXLE NUT CAN CAUSE THE WHEEL TO
FALL OFF DURING TAKEOFF OR LANDING.
(1) Do a check on the wear limits of the axle thread and axle nut of the main landing gear (Fig. 601).
NOTE: A Johnson GJ-5/PD-MD thread measuring system (or equivalent)
____ can be used as an option to measure the threads, but a separate measuring segment and master thread gage ring are necessary for each thread size. The gage ring is used to set the dial indicator before you measure the threads.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-11-85
ALL ú ú 01 Page 602 ú Mar 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
BRAKE ASSEMBLY
AXLE SLEEVE
1.
AXLE
2.
AXLE NUT
Main Gear Axle Wear Limits
FIgure 601 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-11-85
ALL ú ú 01 Page 603 ú Jul 15/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500
MAINTENANCE MANUAL
MAJOR DIAMETER PITCH DIAMETER MINOR DIAMETER REWORK THE ORIGINAL AXLE PER THE OHM ORIGINAL CONFIGURATION UNDERSIZED CONFIGURATION NUT FOR UNDERSIZED AXLE 2.9375-16 UNS 3B THREAD (MODIFIED) 2.8750-16 UNS 3B THREAD (MODIFIED) REWORK THE UNDERSIZE AXLE THREAD PER THE OHM
Main Landing Gear Axle Wear Limits
Figure 601 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-11-85
ALL ú ú 01 Page 604 ú Jul 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
MAIN LANDING GEAR AXLE - APPROVED REPAIRS
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機(jī)維護(hù)手冊 起落架 LANDING GEAR 1(115)
