(5)  
Remove the bolts which attach the fuel line flanges to the port adapter assembly.

 S 024-021
 CAUTION:_______DO NOT PERMIT THE PORT ADAPTER ASSEMBLY TO FALL. DAMAGE TO THE WING SKIN OR THE SEAL ON THE FUEL TANK CAN EASILY OCCUR.
 (6)  Remove the port adapter assembly.
 NOTE: Two persons are necessary to do this step.
____
 (a)  
Put one person in the fuel tank to hold the adapter assembly up.

 (b)  
Put a second person out of the tank to remove the mounting bolts and the washers that attach the port adapter assembly.

 (c)  
Close the access door to the shutoff valve for the engine fuel.

 (d)  
Move the port adapter assembly from between the fuel line flanges.

 (e)  
Lift the port adapter assembly away from its position on the airplane.

 TASK 28-23-11-414-023
 5.  Port Adapter Assembly Installation (Fig. 401)__________________________________
 A. Consumable Materials
 (1)  B00316 Cleaning Solvent - Aliphatic Naphtha TT-N-95
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-23-11
 ALL  ú ú 01 Page 405 ú Nov 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 B. References
 (1)  AMM 28-11-11/401, Wing Fuel Tank Access Panel
 C. Access
 (1)  
Location Zones
 303 Left Wing Inboard Leading Edge
 305 Left Fuel Tank
 403 Right Wing Inboard Leading Edge
 405 Right Fuel Tank

 (2)  
Access Panels
 7405 Fuel Tank Access Door (right)

 D. Procedure
 S 114-024
 (1)  Clean these surfaces with the solvent:
 (a)  
The O-ring grooves of the port adapter assembly

 (b)  
The machined surfaces of the port adapter assembly

 (c)  
The fuel line flanges

 (d)  
The mating surfaces of the front spar.

 S 144-025
 (2)  
Rub off all remaining solvent with a clean cotton cloth.

 S 434-026

 (3)  
Install new O-rings (lightly lubricated with fuel) into the grooves on the port adapter assembly.

 S 424-040
 CAUTION: DO NOT LOOSEN OR BADLY HIT THE O-RING WHEN YOU PUT THE PORT
_______ ADAPTER ASSEMBLY INTO THE FUEL LINE FLANGES. THIS CAN CAUSE DAMAGE TO THE O-RING, OR GIVE A BAD SEAL TO THE PORT ADAPTER ASSEMBLY.
 (4)  Install the port adapter assembly.
 NOTE: Two persons are necessary to do this step.
____
 (a)  Put one person in the fuel tank to hold the port adapter assembly up.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-23-11
 ALL  ú ú 01 Page 406 ú Nov 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 (b) (c) (d) (e) (f)  Put a second person out of the tank to install the parts that attach the port adapter assembly.Carefully move the port adapter assembly into a position between the fuel line flanges.Install the bolts which attach the fuel line flanges to the port adapter assembly.Install the bolts and washers to the port adapter assembly.Tighten the bolts to a torque of 100-140 pound-inches.
 (5)  S 414-030Do the task:  Gate and Actuator Handle Assembly Installation.
 (6)  S 414-029Do the task: Wing Fuel Tank Access Panel Installation (AMM 28-11-11/401).
 (7)  S 414-028Close the access door to the defueling valve.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-23-11
 ALL  ú ú 01 Page 407 ú Nov 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 FUEL QUANTITY INDICATING SYSTEM - DESCRIPTION AND OPERATION
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 燃油 FUEL 3(32)