S 012-045

 (2)
Open the access door, 6540, for the refuel station (Fig. 201).

 (3)  
Remove the cap on the fueling receptacle.

 S 862-046

 (4)  
Connect the bonding cable on the defueling hose nozzle to the ground jack on the wing.

 S 032-112
 NOTE: The bonding cable is not necessary if there is electrical
____ continuity between the nozzle and the receptacle.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-23-00
 ALL  ú ú 09 Page 217 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 (5)  S 492-047Connect the defueling hose nozzle to the fueling receptacle.
 (6)  S 862-113Open the shutoff handle on the hose nozzle.
 (7)  S 012-048Open the access door, 6535, for the defueling valve (Fig. 202).
 (8)  S 862-114Set the defueling valve to the OPEN position.
 (9)  S 862-115Make sure the crossfeed valve is closed.
 S 652-049

 (10) Start the defueling operation.
 NOTE: If it is not easy to get fuel to flow from airplane, use
____ the fuel truck to pump the airplane lines full of fuel (pressure-prime) then start the defueling pumps on the fuel truck.
 (a)  
Use the pump on the fuel truck to fill the airplane fuel lines with fuel (pressure prime).

 (b)  
Start the defueling pumps on the fuel truck.

 S 652-050
 (11) Continue to defuel the airplane until the fuel measuring sticks show the correct quantity of fuel in the No. 2 tank.
 (a)  You can also continue to defuel the airplane until the flowmeter on the fuel truck shows no fuel flow.
 S 652-051
 (12)
 Stop the defueling pump on the fuel truck.

 S 652-052

 (13)
 If you are scheduled to defuel the No. 1 tank or the center tank, do this task: "Fuel Tank Purging and Entry" for the No. 2 tank.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-23-00
 ALL  ú ú 09 Page 218 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 012-055
 (14)
 Do this task:  "Fuel Boost Pump Bypass Valve Removal" (AMM 28-22-61/401), for the bypass valve for the No. 2 tank.

 S 652-056

 (15)
 If you are scheduled to defuel the center tank, do these steps:

 (a)  
Close the removal valves for the forward boost pump and the aft boost pump in the No. 2 tank.

 (b)  
Start the defueling pump on the fuel truck.

 (c)  
Defuel until the fuel truck flowmeter shows no fuel flow.

 (d)  
Stop the defueling pump on the fuel truck.

 S 652-057
 (16) If you are scheduled to defuel the No. 1 tank, do these steps:
 (a)  
Open the crossfeed valve with your hand.

 (b)  
Get access to the boost pumps for the center tank and close the two removal valves for the boost pumps.

 (c)  
Start the defueling pump on the fuel truck.

 (d)  
Defuel until the fuel measuring sticks show the correct quantity of fuel remaining in the tank.

 (e)  
You can also defuel until the flowmeter on the fuel truck shows no fuel flow.

 (f)  
Stop the defueling pump on the fuel truck.

 S 862-060
 (17)
 Close the defueling valve.

 S 412-117

 (18)
 Close the access door, 6535, for the defueling valve.

 S 862-061

 (19)
 Open all of the removal valves for the boost pumps that you closed before this step.

 S 862-118

 (20)
 Make sure that all of the removal valves for the boost pumps are open.

 S 412-062

 (21)
 Install the access panels for the aft main boost pumps and for the center tank boost pumps that you removed before this step.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 燃油 FUEL 3(23)