EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-41-81
 ALL  ú ú 02 Page 502 ú Mar 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL

INDICATOR  BUSSING PLUG BUSSING PLUG  RECEPTACLE BULKHEAD 

 BUSSING PLUG 

 BUSSING PLUG 
P2 PANEL  Fuel Summation Unit Adjustment Figure 501 

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-41-81
 ALL  ú ú 02 Page 503 ú Nov 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 E.  Adjust the Fuel Summation Unit to Show Zero
 S 865-009
 (1) Remove the DO-NOT-CLOSE tags and close these circuit breakers:
 (a)  P6 Main Power Distribution Panel
 1) EP GND FUELING
 2) QTY

 S 865-010
 (2)  
Let the system operate for 5 minutes.

 S 825-011

 (3)  
Get access to the total fuel quantity as shown on the FMCS CDU by the applicable procedure:

 (a)  If the IRS is not aligned: 1) Push the INIT REF button. 2) Make sure that the POS INIT page shows on the CDU. 3) Push the LSK (line select key) 6L button (adjacent to
 <INDEX on the CDU screen display).
 4)  Make sure that the INIT/REF INDEX page shows.
 5)  Make sure that the PERF INIT page shows with the total fuel
 quantity shown on the left side of the screen.
 6)  Push the LSK 3L, <PERF buttons.
 7)  Make sure that the PERF INIT page shows with the total fuel
 quantity shown on the left side of the screen.
 (b)  If the IRS is aligned: 1) Push the INIT REF button. 2) Make sure that the PERF INIT page shows with the total fuel
 quantity shown on the left side of the screen.
 S 215-012
 (4)  Do a check on the CDU display (Fig. 502).
 (a)  
If the FUEL WT shows a value of zero, it is not necessary to adjust the FSU to zero.

 (b)  
If the FUEL WT does not show a value of zero, do these steps: 1) Pull the fuel summation unit from the panel until you can

 get access to the top cover. 2) Remove the top cover. 3) Adjust the EMPTY screw until the FUEL WT shows zero.
 F.  Full Adjustment of the Fuel Summation Unit
 S 865-013
 (1) If one or more ground wires are installed on pin 3, do these steps:
 (a)  
Open these circuit breakers:

 1)  P6 Main Power Distribution Panel a) EP GND FUELING b) QTY

 (b)  
Remove the ground wires.

 (c)  
Close these circuit breakers:

 1)  P6 Main Power Distribution Panel a) EP GND FUELING
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-41-81
 ALL  ú ú 02 Page 504 ú Nov 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL

(4 LOCATIONS)
FUEL SUMMATION UNIT (FSU)
CATHODE
RAY TUBE
(CRT)

CRT BRIGHTNESS CONTROL KNOB
FULL ADJUSTMENT SCREWS ARE
ELECTRIC POTENTIOMETERS
AND ARE FOR THE FUEL TANKS
AS SHOWN.

CONTROL DISPLAY UNIT (CDU)
Fuel Summation Unit and Control Display Unit
Figure 502

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-41-81
 ALL  ú
 ú  02  Page 505
 ú  Nov 15/91 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 b) QTY
 S 865-027
 (2)  If the FMCS CDU page changes, get access to the total fuel quantity as shown on the FMCS CDU by the applicable procedure:
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 燃油 FUEL 3(145)