EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-61-61
 ALL  ú ú 01 Page 404 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 (e)  Attach the actuator link to the input arm: 1) Put the actuator link in its position in the input arm. 2) Install the bolt, washer and nut to attach the actuator
 link to the input arm. 3) Install the cotter pin in the nut.
 S 434-012
 (3)  
Connect the wing spoiler cables to the quadrant:

 (a)  
Install the rig pins A/S-8 thru A/S-11 in the spoiler actuator quadrants No. 2, 3, 6, and 7 (Fig. 401).

 (b)  
Install the rig pin A/S-14 in the spoiler mixer (Fig. 403).

 (c)  
Remove the cable clamps and tags from the cables.

 (d)  
Attach the cables to the quadrant (Fig. 402).

 (e)  
Connect the cables at the turnbuckles in the wheel wells.

 S 824-013
 (4)
Adjust the tension in the cables to the limits shown in Fig. 401.

 S 834-014

 (5)  
Make sure the cables are correctly adjusted:

 (a)  
Remove the rig pins A/S-8 thru A/S-11 and A/S-14.

 (b)  
Turn the captain's aileron control wheel through one full cycle.

 (c)  
Install the rig pin A/S-14 in the spoiler mixer (Fig. 403).

 (d)  
Install the rig pins A/S-8 thru A/S-11 in the spoiler actuator quadrants No. 2, 3, 6, and 7 (Fig. 401).

 (e)  
Make sure the tension in the cable is in the limits shown in Fig. 401.

 (f)  
Do a check of the marks for the shear rivets.

 (g)  
If the marks do not align, replace the shear rivets (Ref 27-61-61/801).

 (h)  
Remove the rig pins from the quadrants and the spoiler mixer.

 (i)  
Install the lock clips and the lockwire on the turnbuckles for the cables.

 S 724-015
 (6)  Do the functional test of the flight spoiler actuator quadrant (Ref 27-61-61/501).
 NOTE: It is only necessary to do the test of the spoiler quadrant
____
 that you replaced.

 F. Put the Airplane Back to Its Usual Condition
 S 864-017
 (1)
Supply the systems A and B hydraulic power (Ref 27-61-00/201).

 S 864-016

 (2)  
Move the flap control lever to the UP position to retract the trailing edge flaps.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-61-61
 ALL  ú ú 01 Page 405 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

737-300/400/500
MAINTENANCE MANUAL

SPOILER MIXER 
RIG PIN A/S-14 
SPEED BRAKE 
CONTROL 
CABLES 
SPOILER 
CONTROL 
CABLES 
SPOILER 
CONTROL 
CABLES 

FWD
Spoiler Mixer Rig Pin Location Figure 403
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-61-61
 ALL  ú ú 01 Page 406 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 (3)  S 864-018Remove the systems A and B hydraulic power (Ref 27-61-00/201).
 (4)  S 864-019Remove the electrical power (Ref 24-22-00/201).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-61-61
 ALL  ú ú 01 Page 407 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 5(71)