B.
Special Tools and Equipment

 (1)  
4MIT65B80307-1 Control Surface Protractor (3 necessary)

 NOTE: You will use one protractor with the stand to measure the
____ angular position of the spoiler panels. You can use a hand-held protractor on the spoiler. You will use the other protractor with the mount to measure the angular position of the aileron control wheel.
 (2)  
F71292-17 Control Surface Protractor Stand Assembly (optional) (2 necessary)

 (3)  
F72790 Aileron Control Wheel Protractor Mount

 (4)  
SE27-0001 Control Wheel Straightedge

 (5) Rig Pin Kit - F70207-93: ~............................................................................... | | | Diameter | Length | | | Ref No. | F70207-( ) | (inches) | (inches) | Function | ................................................................................. | A/S-4 | -11 | 0.309-0.311 | 6.7 |0.25 | Aileron bus drum | 2...........….............….............…..............…........................1
 C. References
 (1)  
22-11-25/501, Autopilot Aileron Actuator

 (2)  
24-22-00/201, Manual Control

 (3)  
27-61-00/201, Spoiler Control System

 D.
Access

 (1)  
Location Zone 101 Control Cabin - Left 102 Control Cabin - Right 216 Left Main Wheel Well 217 Right Main Wheel Well 307 Left Wing Trailing Edge Outboard Flap and Spoilers 407 Right Wing Trailing Edge Outboard Flap and Spoilers

 E.
Prepare for the System Test

 S 485-037
 (1)  
Install the protractor mount and the protractor on the captain's aileron control wheel.

 (2)  
Install the straightedge across the two control wheels.

 (3)  
Set the protractor on the control wheel to zero.

 (4)  
Remove the straightedge from the control wheels.

 S 485-036
 S 945-037
 S 085-038
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-61-00
 ALL  ú ú 03 Page 520 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 485-039
 (5)  Install the protractor stand and the control surface protractor on the spoilers No. 2 and 7.
 NOTE: You can use hand held protractors on the spoilers.
____
 S 825-040
 (6)  
Adjust the control surface protractor to zero.

 S 865-042

 (7)  
Supply the electrical power (Ref 24-22-00/201).

 S 865-041

 (8)
Supply the systems A and B hydraulic power (Ref 27-61-00/201).

 F.
Do the System Test of the Spoiler Control System

 S 735-043
 (1)  Do the test with the speed brake lever in the DOWN position:
 NOTE: Measure the positions of the captain's aileron control wheel
____ from the neutral position during this test.
 (a)  Make sure the aileron system is in the neutral position.
 NOTE: The ailerons are in the neutral position when you can
____ easily install the rig pin A/S-4 in the aileron bus drum.
 1) Remove the rig pin.
 (b)  
Move the speed brake lever to the DOWN position.

 (c)  
Turn the captain's aileron control wheel clockwise until the spoiler No. 7 starts to move up. 1) Make sure the spoiler No. 7 starts to move up when the

 control wheel is 11 |1 degrees clockwise.

 (d)  
Continue to turn the control wheel to the 87 degrees clockwise position: 1) Make sure the spoiler No. 7 is up 38 |2 degrees. 2) Make sure that the spoilers No. 2 and 3 are in the fully

 down position.

 (e)  
Turn the control wheel counterclockwise until the spoiler No. 7 starts to move down. 1) Make sure the spoiler starts to move down when the control

 wheel is a minimum of 70 degrees clockwise.

 (f)  
Continue to turn the control wheel counterclockwise until the spoiler No. 7 is in the fully down position. 1) Make sure the spoiler is in the fully down position when

 the control wheel is 5 |3 degrees clockwise.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機(jī)維護(hù)手冊 飛行操縱 FLIGHT CONTROLS 5(35)