27-62-21
 ALL  ú ú 01 Page 502 ú Nov 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 
737-300/400/500MAINTENANCE MANUAL
 7) Move the LIGHTS switch on the P2-1 panel to the BRT
 position.
 a) Make sure the intensity of the SPEED BRAKE ARMED light
 goes back to the initial level.
 (d)  AIRPLANES WITHOUT SPEED BRAKE TEST SWITCHES;
 Move one of the thrust levers forward to retract the speed
 brake lever actuator. Move the thrust lever back to the idle
 position.
 (e)  Make sure the speed brake lever is in the ARMED position and
 the SPEED BRAKE ARMED light is on.
 (f)  Do a test of the SPEED BRAKE ARMED and DO NOT ARM lights with
 the antiskid control unit (Fig. 501):
 1) On the antiskid control unit, turn the WHEEL SELECT knob to
 the LO position and push the VALVE and SKID buttons.
 a) Make sure the SPEED BRAKE DO NOT ARM light comes on.
 2) Release the VALVE and SKID buttons.
 a) Make sure the SPEED BRAKE ARMED light comes on.
 b) Make sure the spoilers do not extend.
 3) Do the test again with the WHEEL SELECT knob in the LI, RI,
 and RO positions.
 (g)  With the speed brake lever in the ARMED position and the SPEED
 BRAKE ARMED light on, turn the WHEEL SELECT knob to the LO
 position. 

WHEEL SELECT KNOB
Automatic Speed Brake Test Equipment
Figure 501

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-62-21
 ALL  ú ú 01 Page 503 ú Nov 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 (h)  Push and hold the LW (lock wheel) and SKID buttons.
 NOTE: The SPEED BRAKE DO NOT ARM light will come on
____ momentarily if you do not push the buttons at the same time.
 1) Make sure the speed brake lever moves to the UP position. 2) Make sure the flight spoilers No. 2, 3, 6, and 7 move to the full up position. 3) Make sure the ground spoilers No. 4 and 5 move to the full up position. 4) Make sure the ground spoiler No. 0, 1, 8 and 9 move to the full up position. 5) Make sure the SPEED BRAKE ARMED light is on.
 (i)  
Release the LW and SKID buttons.
 1) The SPEED BRAKE DO NOT ARM light will come on.

 (j)  
Move the speed brake lever to the DOWN position. 1) Make sure the SPEED BRAKE DO NOT ARM light is off.

 (k)  
AIRPLANES WITH SPEED BRAKE TEST SWITCHES; Push the SPEED BRAKE TEST switch 3 to retract the speed brake lever actuator.

 (l)  
AIRPLANES WITHOUT SPEED BRAKE TEST SWITCHES; Move one of the thrust levers forward to retract the speed brake lever actuator. Move the thrust lever back to the idle position.

 S 865-013
 (3)  
Make sure these circuit breakers are closed:

 (a)  
P6 Panel
 1) INDICATOR LIGHTS
 2) FLIGHT CONTROL VALVES
 3) SPOILER SHUTOFF VALVES
 4) AUTO SPEED BRAKE
 5) ALL ANTISKID

 S 865-014
 (4)  
Move the No. 1 and 2 thrust levers to the idle position.

 (a)
Move the speed brake control lever to the ARMED position. 1) Make sure the SPEED BRAKE ARMED light comes on.

 S 725-008
 (5)  
Do the functional test of the speed brake arming switch (Ref 27-62-34/401).

 S 865-009

 (6)  
Remove the DO-NOT-CLOSE tags and close these circuit breakers:

 (a)  
P6-2 Panel
 1) AUTO SLAT NO. 1 DC

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-62-21
 ALL  ú ú 04 Page 504 ú Mar 15/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 2)  AUTO SLAT NO. 2 DC
 3)  AIRPLANES WITH AUTOSLAT COMPUTER; AUTOSLAT NO. 1 AC AUTOSLAT NO. 2 AC
 S 865-010
 (7)  
Push the RECALL button on the glare shield.
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 5(116)