EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-62-31
ALL ú ú 01 Page 405 ú Mar 15/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
SPEED BRAKE LEVER ACTUATOR - ADJUSTMENT/TEST
____________________________________________
1. General_______
A. There is one task in this procedure, a functional test of the speed brake lever actuator.
TASK 27-62-31-725-001
2. Speed Brake Lever Actuator Functional Test__________________________________________
A. References
(1)
24-22-00/201, Manual Control
(2)
27-62-00/201, Speed Brake Control System
(3)
27-83-00/101, Leading Edge Autoslat System
B.
Access
(1)
Location Zone 101, 102 Control Cabin 205 Electronic Compartment 307, 407 Wing Trailing Edge Outboard Flap and Spoilers 309, 409 Wing Trailing Edge Outboard Flap and Spoilers
C.
Procedure
(1) S 865-002Supply the electrical power (Ref 24-22-00/201).
(2) S 865-003Open these circuit breakers and attach DO-NOT-CLOSE tags: (a) P6-2 Panel 1) AUTO SLAT NO. 1 DC 2) AUTO SLAT NO. 2 DC 3) AIRPLANES WITH AUTOSLAT COMPUTER; AUTOSLAT NO. 1 AC AUTOSLAT NO. 2 AC
(3) S 865-004Supply the systems A and B hydraulic power (Ref 27-62-00/201).
(4) S 865-005Make sure the ANTISKID switch on the center instrument panel is in the ON position.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-62-31
ALL ú ú 02 Page 501 ú Mar 15/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 865-013
(5)
Make sure these circuit breakers are closed:
(a)
P6 Panel
1) INDICATOR LIGHTS
2) FLIGHT CONTROL VALVES
3) SPOILER SHUTOFF VALVES
4) AUTO SPEED BRAKE
5) ALL ANTISKID
S 865-014
(6)
Move the No. 1 and 2 thrust levers to the idle position.
S 725-015
(7)
Do a test of the speed brake lever actuator:
NOTE: During this test you use the antiskid control unit to give
____ wheel speed signals to the automatic speed brake system. The antiskid control unit is installed in the electronics compartment.
The weight of the airplane must be on the landing gear or the right main landing gear must be compressed a minimum of 5 inches during the test.
(a)
Make sure the parking brake is released.
(b)
Make sure the speed brake lever is in the DOWN position.
(c)
AIRPLANES WITH SPEED BRAKE TEST SWITCHES; Do a test of the SPEED BRAKE TEST switches: 1) Push the SPEED BRAKE TEST switch 3 to retract the speed
brake lever actuator.
2) Move the speed brake lever from the DOWN to the ARMED detent.
3) Make sure the SPEED BRAKE ARMED light on the center panel is ON.
4) Push the SPEED BRAKE TEST switch 1 to actuate the speed brake indicator test. a) Make sure the SPEED BRAKE ARMED light is not on.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-62-31
ALL ú ú 04 Page 502 ú Jul 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
b) Make sure the SPEED BRAKE DO NOT ARM light is on.
5) Operate the speed brake indicator test again with the SPEED BRAKE TEST switches 2 and 3.
6) Move the LIGHTS switch on the P2-1 panel to the DIM position. a) Make sure the intensity of the SPEED BRAKE ARMED light
decreases.
7) Move the LIGHTS switch on the P2-1 panel to the BRT position. a) Make sure the intensity of the SPEED BRAKE ARMED light
goes back to the initial level.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 5(119)
