(5)
Install the stabilizer trim electric actuator (AMM 27-41-71/401).
S 415-042
TASK 27-41-00-735-045
6. Stabilizer Trim Auxiliary Brake System Test___________________________________________
A. Access
(1) Location Zones
101 Control Cabin, LH
102 Control Cabin, RH
702 Tail Compartment Access Door
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-41-00
ALL ú ú 01 Page 522 ú Mar 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
(2)
Access Panels
3701 Stabilizer Trim Access Door
B.
Procedure
S 015-046
(1)
Open the access door 3701.
S 735-044
(2)
Do a test of the stabilizer trim auxiliary brake (Fig. 504):
(a)
Turn the captain's stabilizer trim control wheel on the control stand approximately two turns clockwise.
(b)
Put a 500 pound-inches clockwise torque to the upstop of the jackscrew and hold. 1) Make sure you do not put the torque on the safety rod nut. 2) Make one line on the gearbox coverplate and the umbrella
assembly.
3) Release the torque.
(c)
Put a 500 pound-inches counterclockwise torque to the upstop of the jackscrew and hold. 1) Make a line on the umbrella assembly in line with the line
on the coverplate.
2) Release the torque.
(d)
At the outer edge of the umbrella assembly, use a flexible scale to measure the arc distance between the lines. 1) On 65-49970-13 thru -24 stabilizer trim actuators,
make sure that the arc distance dimension is not more than
0.52 inch (17.6 degrees).
2) On 65-49970-25 and subsequent stabilizer trim actuators, and 65-49970-13 thru -24 actuator with SB 27-1161, make sure that the arc distance dimension is not more than
0.62 inch (21.0 degrees).
(e)
Turn the captain's stabilizer trim control wheel on the control stand approximately two turns counterclockwise.
(f)
Put a 500 pound-inches counterclockwise torque to the upstop of the jackscrew and hold. 1) Make sure you do not put the torque on the safety rod nut. 2) Make one line on the gearbox coverplate and the umbrella
assembly.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-41-00
ALL ú ú 04 Page 523 ú Mar 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
SAFETY
ROD NUT
Stabilizer Trim Auxiliary Brake System Test
Figure 504
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-41-00
ALL ú ú 01 Page 524 ú Mar 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
B02261
(g)
(h)
(i)
A
737-300/400/500MAINTENANCE MANUAL
3) Release the torque.
Put a 500 pound-inches clockwise torque to the upstop of the
jackscrew and hold.
1) Make a line on the umbrella assembly in line with the line
on the coverplate. 2) Release the torque.At the outer edge of the umbrella assembly, use a flexible scale to measure the arc distance between the lines. 1) On 65-49970-13 thru -24 stabilizer trim actuators,
make sure that the arc distance dimension is not more than
0.52 inch (17.6 degrees).
2) On 65-49970-25 and subsequent stabilizer trim actuators, and 65C34751 actuators (65-49970-13 thru -24 with SB 27-1161), make sure that the arc distance dimension is not more than
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 3(85)
