(a)
Adjustment of the elevator control cables EA and EB
(b)
Adjustment of the pitch force transducers (AMM 22-11-92/501).
(c)
Adjustment of the elevator control pushrods
NOTE: Do this step if you remove the elevators or the output
____ torque tube; or if the elevators are not synchronized at the neutral position.
(d)
Adjustment of the input rod of the elevator power control unit (PCU)
(e)
Adjustment of the input rods of the neutral shift mechanism
(f)
Adjustment of the output rod of the feel and centering unit
(g)
Adjustment of the elevator tab pushrods (ref Fig. 507A).
(h)
Adjustment of the input rod of the feel computer.
B.
Special Tools and Equipment
(1)
Rig Pins (E-1, E-4, and E-5) - 0.309 +0.002/-0.000-inch diameter,
6.7 |.25 inches long (MS20392-4)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-31-00
ALL ú ú 01 Page 505 ú Jul 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
(2) Rig Pins (E-2 and E-3) - 0.4941 |0.0004-inch diameter, 4.5 |0.25 inches long (MS20392-7)
NOTE: The rig pins are part of the kit F70207-93 or -97.
____
(3)
F80055-1 - Trammel Bar
(4)
F80063-501 - Elevator Rigging and Restraining Tool
(5)
C27028 (preferred) - Rigging Fixture, Elevator Tab
(6)
C27032 - Stabilizer / Elevator (Ski Jump)
(7)
F80248-8 - (optional) Rigging Fixture, Elevator Tab
(8)
TE27T-31001-15 - (optional) Rigging Fixture, Elevator Tab, Inboard Locations
(9)
TE27T-31001-17 - (optional) Rigging Fixture, Elevator Tab, Outboard Locations
C.
Standard Tools and Equipment
(1)
Scale - 0-2 feet, in inches and hundredths of an inch increments
(2)
Tensiometer - 0-320 pounds capacity
(3)
Spring Scale - 0-50 pound capacity, graduated in 1-pound increments
D.
Consumable Materials
(1) D00015 - Grease - BMS 3-24 (Preferred) D00015
(2)
D00013 - Grease - MIL-G-23827 (Optional)
E.
References
(1)
AMM 22-11-14/501, Elevator Neutral Shift Sensor
(2)
AMM 22-11-31/501, Stabilizer Position Sensor
(3)
AMM 22-11-92/501, Pitch Control Wheel Steering Force
(4)
AMM 27-31-00/201, Elevator and Tab Control System
(5)
AMM 27-31-00/501, Elevator and Tab Control System
(6)
AMM 27-31-14/401, Elevator Power Control Unit
F.
Access
(1)
Location Zones
705 Tail Cone Access Door
711 Elevator and Tab, LH
712 Elevator and Tab, RH
(2)
Access Panels
3801 Tail Cone Access Door, LH
3802 Tail Cone Access Door, RH
9105 Access Panel Trailing Edge, LH
9205 Access Panel Trailing Edge, RH
G.
Procedure
S 865-034
(1)
Use the trammel bar to set the B dimension at 41.57 |0.01 inches (Fig. 502).
S 865-035
(2)
Do this task: "Remove the pressure from the Elevator Hydraulic Systems A and B" (AMM 27-31-00/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-31-00
ALL ú ú 01 Page 506 ú Mar 15/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 2(103)
