(3) Make sure that the access platform is in position.

 Subtask 78-32-42-010-055
 B. Make sure that the fan cowl doors are open: (Ref. TASK 71-13-00-010-040) FOR 1000EM1 437AL, 438AR FOR 1000EM2 447AL, 448AR
 F 『 EEFF : ALL E Page 42178-32-42
 E E May 01/05 E E ECES E

 F 『
 E C F M E
 E E
 E 56-5B E
 E E
 Subtask 78-32-42-040-054

 C. Make sure that the thrust reverser is unserviceable (Ref. TASK 78-30-00-481-041).
 4. Procedure
_________
 (Ref. Fig. 403/TASK 78-32-42-991-307)
 Subtask 78-32-42-420-051
 A. Installation of the Upper Rear Fairing
 NOTE : Apply a witness line of finish paint EA4 Blue 5991 (Material No.
____ CP2245) on all nuts and connections when you have done the check of their torques.
 (1) Set the upper rear fairing on the pylon and align the screw holes.

 (2) Install the small screws and the nuts.

 (3) TORQUE the nuts to between 30 and 40 lbf.in (0.33 and 0.45 m.daN)

 (4) Install the other screws and the nuts.

 (5) TORQUE nuts to between 35 and 45 lbf.in (0.39 and 0.50 m.daN)

 (6) TORQUE the screws to between 35 and 45 lbf.in (0.39 and 0.50 m.daN)

 (7) Cleaning

 WARNING : BEFORE THE USE OF SOLVENT, PROTECTIVE FILM OR SEALANT
_______ CAREFULLY READ THE APPLICABLE "MATERIAL SAFETY DATA SHEET" AND FOLLOW ALL LISTED SAFETY AND HEALTH PRECAUTIONS. USE THESE PRODUCTS IN AN AREA OPENED TO THE AIR AND WEAR PROTECTION GLOVES. THESE PRODUCTS ARE FLAMMABLE AND VAPOR IS DANGEROUS. THEY MAY CAUSE IRRITATION OF EYES, NOSE, THROAT AND SKIN. HIGH CONCENTRATIONS MAY CAUSE WEAKNESS, HEADACHE, NAUSEA, DIZZINESS AND IMPAIRED JUDGEMENT.
R (a) Clean the surface where the sealant will be applied with acetone R (Material No. CP1039) or stoddard solvent (Material No. CP2011) R or ardrox 552 (Material No. CP2559) or turco ind 79 (Material No. R CP2560) or mag-chem teksol (Material No. CP2566) or degreasol 99R R (Material No. CP2584) or mag-chem skysol (Material No. CP2656) or R isopropyl alcohol (Material No. CP1041) and dry with clean R compressed air.
 F 『 EEFF : ALL E Page 42278-32-42
 E E May 01/05 E E ECES E

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

 (8) Apply PR1750 class B2 (Material No. CP2243) between the upper rear fairing and the hinge access bracket.

 (9) Apply a bead PR1750 class B2 (Material No. CP2243) around the lower part of the rear fairing.

 5. Close-up
________ Subtask 78-32-42-440-052
 A. Make the thrust reverser serviceable. (Ref. TASK 78-30-00-081-041) Subtask 78-32-42-410-054
 B. Close Access
 (1) Make sure that the work area is clean and clear of tool(s) and other items.

 (2) Close the fan cowl doors: (Ref. TASK 71-13-00-410-040)
 FOR 1000EM1
 437AL, 438AR
 FOR 1000EM2
 447AL, 448AR

 (3) Remove the access platform(s).

 (4) Remove the warning notice(s).

 F 『 EEFF : ALL E Page 42378-32-42
 E E May 01/05 E E ECES E RAMP FAIRING - INSPECTION/CHECK

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

_______________________________
 TASK 78-32-42-210-001
 Detailed Visual Inspection of the Ramp Fairing
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific warning notice No specific access platform 1 m (3 ft. 3 in.) HIX3005 1 SAFETY SLEEVE - PIVOTING DOOR ACTUATOR
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. CP2517  * aerodynamic tape (Ref. 70-30-00)
 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
71-13-00-010-040 Opening of the Fan Cowl Doors 71-13-00-410-040 Closing of the Fan Cowl Doors 78-30-00-081-041 Make the Thrust Reverser Serviceable after
 Maintenance 78-30-00-481-041 Make the Thrust Reverser Unserviceable for Maintenance 78-32-41-080-001 Removal of the Safety Sleeve from Blocker Door Actuator 78-32-41-480-001 Installation of the Safety Sleeve on Blocker Door Actuator
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EXHAUST 2(86)