(2) Clean the areas:
WARNING : BEFORE THE USE OF SOLVENT, PROTECTIVE FILM OR SEALANT
_______ CAREFULLY READ THE APPLICABLE "MATERIAL SAFETY DATA SHEET" AND FOLLOW ALL LISTED SAFETY AND HEALTH PRECAUTIONS. USE THESE PRODUCTS IN AN AREA OPENED TO THE AIR AND WEAR PROTECTION GLOVES. THESE PRODUCTS ARE FLAMMABLE AND VAPOR IS DANGEROUS. THEY MAY CAUSE IRRITATION OF EYES, NOSE, THROAT AND SKIN. HIGH CONCENTRATIONS MAY CAUSE WEAKNESS, HEADACHE, NAUSEA, DIZZINESS AND IMPAIRED JUDGEMENT.
R (a) Clean the areas where you removed the sealant acetone (Material R No. CP1039) or stoddard solvent (Material No. CP2011) or ardrox R 552 (Material No. CP2559) or turco ind 79 (Material No. CP2560) R or mag-chem teksol (Material No. CP2566) or degreasol 99 R R (Material No. CP2584) or mag-chem skysol (Material No. CP2656) or R isopropyl alcohol (Material No. CP1041).
(3) Dry the areas with a clean cloth.
F 『 EEFF : ALL E Page 41878-36-42
E E May 01/05 E E ECES E
F 『
E C F M E
E E
E 56-5B E
E E
TASK 78-36-42-400-001
Installation of the Adapter Ring Assembly
CAUTION : DO NOT DROP ANY BOLT OR WASHER IN VARIABLE BLEED VALVE AREA. THIS
_______
COULD CAUSE DAMAGE TO ENGINE.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific warning notice
No specific HIX3013-OG
No specific access platform 1 m (3 ft. 3 in.)
No specific Torque Wrench : range 36.00 to 220.00 lbf.in
(0.40 to 2.60 m.daN)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R Material No. CP1039 * R acetone (Ref. 70-30-00) Material No. CP2011 USA MIL-D-12491 stoddard solvent (Ref. 70-30-00) Material No. CP2104 * molykote G rapid (Ref. 70-30-00) Material No. CP2245 * finish paint EA4 blue 5991 (Ref. 70-30-00) Material No. CP2267 *
RTV 106 (Ref. 70-30-00) R Material No. CP2559 * R ardrox 552 (Ref. 70-30-00) R Material No. CP2560 * R turco ind 79 (Ref. 70-30-00) R Material No. CP2566 * R mag-chem teksol (Ref. 70-30-00)
F 『 EEFF : ALL E Page 41978-36-42
E E May 01/05 E E ECES E -------------------------------------------------------------------------------
F 『
E C F M E
E E
E 56-5B E
E E
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R Material No. CP2584 *
R degreasol 99 R (Ref. 70-30-00)
R Material No. CP2656 *
R mag-chem skysol (Ref. 70-30-00) Material No. CP8001 * lockwire 0.032 in. (Ref. 70-30-00) Material No. CP8002 * lockwire 0.032 in. (Ref. 70-30-00)
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
71-13-00-010-040 Opening of the Fan Cowl Doors
71-13-00-410-040 Closing of the Fan Cowl Doors
78-30-00-081-041 Make the Thrust Reverser Serviceable after
Maintenance 78-30-00-481-041 Make the Thrust Reverser Unserviceable for Maintenance 78-32-11-400-002 Installation of the Left or Right Half Door of Thrust
Reverser
78-36-42-991-301 Fig. 401
78-36-42-991-302 Fig. 402
78-36-42-991-303 Fig. 403
78-36-42-991-310 Fig. 404
78-36-42-991-311 Fig. 405
78-36-42-991-312 Fig. 406
78-36-42-991-304 Fig. 407
78-36-42-991-306 Fig. 408
3. Job Set-up
__________
Subtask 78-36-42-860-050
A. Aircraft Maintenance Configuration
(1) On the center pedestal, on the ENG panel 115VU, make sure that a warning notice is in position to tell persons not to start the engine.
F 『 EEFF : ALL E Page 42078-36-42
E E May 01/05 E E ECES E
F 『
E C F M E
E E
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EXHAUST 2(112)
