F 『
E C F M E
E E
E 56-5B E
E E
-------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
D. Gouge
E. Hole
F. Nick, scratch
F EEFF : ALL E E ECES Five cracks maximum per half door.
0.008 in. (0.20 mm) maximum depth over a 8 in. (203.2 mm) length.
1 in. (25.4 mm) maximum diameter
7.4 in. (188 mm) minimum separation, between other holes, cracks or delaminations.
Five holes maximum per half door.
0.008 in. (0.20 mm) maximum depth over a 8 in. (203.2 mm) length.
『E EEEIf more than five cracks,replace the half door (Ref. TASK 78-32-11-000-002) and (Ref. TASK 78-32-11-400-002).
Seal damaged aera fromentrance of moisture withaerodynamic tape (Material No. CP2517). Replace tape if peeled or damaged. Monitor at "A" check. If the gouges are not in the serviceable limits, replace the half door (Ref. TASK 78-32-11-000-002) and (Ref. TASK 78-32-11-400-002) .
Seal damaged area fromentrance of moisture with aerodynamic tape (Material No. CP2517).
Moisture at "A" check.
If more than five holes,replace the half door (Ref. TASK 78-32-11-000-002) and (Ref. TASK 78-32-11-400-002).
Seal damaged aera fromentrance of moisture withaerodynamic tape (Material No. CP2517). Replace tape if peeled or damaged. Monitor at "A" check.
78-32-11Page 608
Feb 01/98
F 『
E C F M E
E E
E 56-5B E
E E
-------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS
-------------------------------------------------------------------------------If the nick or scratch is not permitted, replace the half door (Ref. TASK 78-32-11-000-002) and (Ref. TASK 78-32-11-400-002).
2. Examine the internal area of the strut for:
A. Crack None permitted. If there is crack, replace the half door (Ref. TASK 78-32-11-000-002) and (Ref. TASK 78-32-11-400-002) .
Subtask 78-32-11-010-052
B. Open the thrust reverser doors to the 45 degrees position (Ref. TASK 78-36-00-010-040): FOR 1000EM1 451AL, 452AR FOR 1000EM2 461AL, 462AR
Subtask 78-32-11-210-051
C. Do a visual inspection of the one and eleven o'clock struts as follows:
-------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
1. Examine the strut for:
A. Crack or buckle on No damage is permitted If there are cracks or the part near the buckles on the part near inner barrel the inner barrel, replace
the strut, (Ref. SRM 54-30-00).
F 『 EEFF : ALL E Page 60978-32-11
E E Feb 01/98 E E ECES E
F 『
E C F M E
E E
E 56-5B E
E E
-------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
B. Movement: try to No movement is permitted If there is movement of move the strut by the strut, replace the hand bushing (Ref. TASK 78-32-
11-000-001) and (Ref. TASK 78-32-11-400-001).
Subtask 78-32-11-980-050
D. Open the blocker door manually (Ref. TASK 78-32-41-860-001).
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EXHAUST 2(56)
