曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

0.5 in. (12.7 mm) maximum length, 3 in.
(76.2 mm) minimum between two cracks, 4.17 in. (105.92 mm) maximum total length of cracks If the fretting is not inthe seviceable limits,replace the outer flange(Ref. TASK 78-36-42-000-001) and (Ref. TASK 78-36-42-400-001)
NOTE : Repair the damaged
____ outer flange(s) in a shop environment (Ref. ESM 71-00-01).
If the crack is in theserviceable limits, stopdrill crack 0.5 in. (12.7mm) long and over. If thecrack is not in theserviceable limits, replace the inner flange (Ref. TASK 78-36-42-000-001) and (Ref. TASK 78-36-42-400-001)
If the fretting is not inthe serviceable limits,replace the inner flange(Ref. TASK 78-36-42-000-001) and (Ref. TASK 78-36-42-400-001)
If the crack is not in theserviceable limits,replace the struts(Ref. TASK 78-36-42-000-001) and (Ref. TASK 78-36-42-400-001)
 F 『 EEFF : ALL E Page 61278-36-42
 E E Feb 01/03 E E ECES E

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

 -------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
5. Inspect the lower stop fitting for:
 A. Crack
B. Fretting
6. Inspect the upper outer and forward seal fitting for:
 A. Crack
7. Inspect the splice assembly for:
 A. Crack
8. Inspect the hold-open rod support for:
 A. Crack or bend
9. Inspect the hold-open rod for:
 F
EEFF : ALL
E

R E ECES
No crack permitted

Maximum depth 0.039 in.
(0.99 mm)
No crack permitted
No crack permitted
No crack or bend permitted
『E EE EIf there is crack, replace the lower stop fitting (Ref. TASK 78-36-42-000-001) and (Ref. TASK 78-36-42-400-001)
If the fretting is not inthe serviceable limits, replace the lower stop fitting (Ref. TASK 78-36-42-000-001) and (Ref. TASK 78-36-42-400-001)
It there is a crack, replace the seal fitting (Ref. TASK 78-36-42-000-001) and (Ref. TASK 78-36-42-400-001)
If there is a crack, replace the splice (Ref. TASK 78-36-42-000-001) and (Ref. TASK 78-36-42-400-001)
If there is a crack and/orbend, replace the hold-open rod support (Ref. TASK 78-36-42-000-001) and (Ref. TASK 78-36-42-400-001)

78-36-42Page 613
Feb 01/03

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

 -------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
A. Crack  No crack permitted If there is a crack, replace the hold-open rod (Ref. TASK 78-36-42-000-001) and (Ref. TASK 78-36-42-400-001)
 B. Fretting Maximum depth 0.039 in.  If the fretting is not in
 (0.99 mm)  the serviceable limits, replace the hold-open rod (Ref. TASK 78-36-42-000-001) and (Ref. TASK 78-36-42-400-001)
 10. Inspect the hold-open rod pins for:
 A. Swag  No swag permitted If there is swag, replace the hold-open rod (Ref. TASK 78-36-42-000-001) and (Ref. TASK 78-36-42-400-001)
 5. Close-up
________
 Subtask 78-36-42-410-050
 A. Close Access
 (1) Make sure that the work area is clean and clear of tool(s) and other items.

 (2) Close the thrust reverser doors (Ref. TASK 78-36-00-410-040): FOR 1000EM1 451AL, 452AR FOR 1000EM2 461AL, 462AR

 (3) Remove the access platform(s).

 F 『 EEFF : ALL E Page 61478-36-42
 E E Feb 01/03 ERE
ECES  E Subtask 78-36-42-440-050

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

 B. Make the thrust reverser serviceable (Ref. TASK 78-30-00-081-041). Subtask 78-36-42-410-051
 C. Close Access
 (1) Close the fan cowl doors (Ref. TASK 71-13-00-410-040): FOR 1000EM1 437AL, 438AR FOR 1000EM2 447AL, 448AR

 (2) Remove the warning notice(s).

 F 『 EEFF : ALL E Page 61578-36-42
 E E Feb 01/98 E E ECES E

 F 『
 E C F M E
 E E
 E 56-5B E
 E E

R TASK 78-36-42-210-002
R Detailed Visual Inspection of the Engine Outer Flanges and the Thrust Reverser R "J" Ring
R 1. Reason for the Job
__________________
R Self Explanatory
R 2. Job Set-up Information
______________________
R A. Fixtures, Tools, Test and Support Equipment
R -------------------------------------------------------------------------------R REFERENCE QTY DESIGNATION R -------------------------------------------------------------------------------
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EXHAUST 2(118)