(2) Put an access platform in position. Subtask 78-36-51-040-051

 C. Make the thrust reverser unserviceable (Ref. TASK 78-30-00-481-041). Subtask 78-36-51-869-052

 D. Retract the Wing Slats CAUTION : RETRACT WING SLATS BEFORE OPENING THRUST REVERSER OR DAMAGE CAN
_______
 OCCUR.

 (1) Retract the slats (Ref. TASK 27-80-00-866-005) and install a warning notice.
 F 『 EEFF : ALL E Page 60278-36-51
 E E Feb 01/98 E E ECES E Subtask 78-36-51-010-053

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

 E. Open the thrust reverser doors to 45 degree position (Ref. TASK 78-36-00-010-040): FOR 1000EM1 451AL, 452AR FOR 1000EM2 461AL, 462AR
 4. Procedure
_________
 (Ref. Fig. 601/TASK 78-36-51-991-301)
 Subtask 78-36-51-210-050
 A. Do a Visual Inspection of the Thrust Reverser Half Door Opening Actuator and Hydraulic Hose
 -------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
1. Inspect the half door opening actuator for:
 A. Damage  No damage permitted If you find some damage, replace the door opening actuator (Ref. TASK 78-36-51-000-041) and (Ref. TASK 78-36-51-400-041)
 B. Crack  No crack permitted If there is a crack, replace the door opening actuator (Ref. TASK 78-36-51-000-041) and (Ref. TASK 78-36-51-400-041)
 C. Hydraulic leakage  The Dynamic rate of 4 If the leakage comes from drops per 25 actuation the nipple, check the cyles is allowed. nipple for correct torque The static rate of 4 (Ref. TASK 78-36-51-400-drops in 8 hours is 041).
 F 『 EEFF : ALL E Page 60378-36-51
 E E Feb 01/98 E E ECES E F 『 E C F M E E E E 56-5B E

 Thrust Reverser Half Door Opening Actuator
 Figure 601/TASK 78-36-51-991-301
 F EEFF :  ALL  『E 78-36-51 Page 604 
E  E  Feb 01/98
 E  E
 ECES  E

 F 『
 E C F M E
 E E
 E 56-5B E
 E E

 -------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
2. Inspect the related
 hardware of the door
 opening actuator for:
 A. Damage 
R  3. Inspect rod end pin 
R  for correct 
R  installation: 
R 
R 
R 
R 
R 
R 
R  4. Inspect the hydraulic
 hose for:
 A. Damage 

F  『
 EEFF :  ALL  E 
E  E
 E  E
 ECES  E

 allowed.

No damage permitted
Make sure the rod end pin head is on the top of the actuator. Make sure the washer and circlip are on the bottom and tight.
No damage permitted If the leakage is beyond the permitted limits, replace the door-opening actuator (Ref. TASK 78-36-51-000-041) and (Ref. TASK 78-36-51-400-041)
 If the leakage comes from the body of the actuator, replace the door opening actuator (Ref. TASK 78-36-51-000-041) and (Ref. TASK 78-36-51-400-041)
If you find some damage, replace the damaged part (Ref. TASK 78-36-51-000-041) and (Ref. TASK 78-36-51-400-041)
If pin head is on the bottom and washer is on the top, reinstall actuator. If washer and circlip are found missing or loose, replace the actuator. (Ref. TASK 78-36-51-000-041) and (Ref. TASK 78-36-51-400-041)
If you find some damage, replace the hydraulic hose (Ref. TASK 78-36-51-000-041) and (Ref. TASK 78-36-51-400-041)

78-36-51Page 605
Feb 01/02

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

 -------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
B. Hydraulic leakage

R 5. Examine the door opening actuator cooling jackets, look for:
 A. Blocked Drain
B. Cracks or Dents
R 6. Examine the door opening actuator flexible cooling hoses, look for:
 A. Wear or Cuts
B. Holes No hydraulic leakage permitted
Not allowed
None allowed
Wear or cuts are allowed if they are not fully through the hose
None allowed If there is leakage, checkcoupling nuts for correct torque (Ref. TASK 78-36-51-400-041).
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EXHAUST 2(125)