Subtask 78-36-41-040-051
 C. Make the thrust reverser unserviceable (Ref. TASK 78-30-00-481-041). Subtask 78-36-41-010-053
 D. Open the left thrust reverser cowl door (Ref. TASK 78-36-00-010-040) FOR 1000EM1 451AL FOR 1000EM2 461AL
 4. Procedure
_________ (Ref. Fig. 402/TASK 78-36-41-991-301) Subtask 78-36-41-020-051
 A. Removal of the Thrust Reverser Half Door Stirrups:
 (1) Removal of the Aft Half Door Stirrup

 (a) Remove the screw (15) and locking bracket (10) from the tension nut (20).

 (b) Remove the tension nut (20) from the stirrup (30).

 (c) Remove the stirrup (30) from the thrust reverser half door.

 (2) Removal of the Middle Half Door Stirrup

 (a) Remove the screw (15) and locking bracket (10) from the tension nut (20).

 (b) Remove the tension nut (20) from the stirrup (30).

 F 『 EEFF : ALL E Page 41178-36-41
 E E Feb 01/98 E E ECES E F 『 E C F M E E E E 56-5B E F 『 E C F M E E E E 56-5B E E 56-5B E E E

 Half Door Stirrups and Centering Pins
 Figure 402/TASK 78-36-41-991-301- 12 (SHEET 1)
 F EEFF :  ALL  『E 78-36-41 Page 412 
E  E  Feb 01/98
 E  E
 ECES  E

 Half Door Stirrups and Centering Pins
 Figure 402/TASK 78-36-41-991-301- 22 (SHEET 2)
 F EEFF :  ALL  『E 78-36-41 Page 413 
E  E  Feb 01/98
 E  E
 ECES  E

 F  『
 E  C F M  E
 E  E

 (c) Remove the stirrup (30) from the thrust reverser half door.
 (3) Removal of the Forward Half Door Stirrups
 (a) Remove the screws (15) and locking brackets (10) from the tension nuts (20).

 (b) Remove the tension nuts (20) from the stirrups (30).

 (c) Remove the stirrups (30) from the thrust reverser half door.

 F 『 EEFF : ALL E Page 41478-36-41
 E E Feb 01/98 E E ECES E TASK 78-36-41-400-044

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

 Installation of the Thrust Reverser Half Door Stirrups
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific warning notice
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
71-13-00-010-040 Opening of the Fan Cowl Doors 71-13-00-410-040 Closing of the Fan Cowl Doors 78-30-00-081-041 Make the Thrust Reverser Serviceable after
 Maintenance 78-30-00-481-041 Make the Thrust Reverser Unserviceable for
 Maintenance 78-36-00-010-040 Opening of the Thrust Reverser Doors 78-36-00-410-040 Closing of the Thrust Reverser Doors 78-36-41-820-042 Adjustment of the Thrust Reverser Half Door Latches 78-36-41-991-301 Fig. 402
 3. Job Set-up
__________
 Subtask 78-36-41-860-051
 A. Aircraft Maintenance Configuration
 (1) On the center pedestal, on the ENG panel 115VU, make sure that a warning notice is in position to tell persons not to start the engine.
 F 『 EEFF : ALL E Page 41578-36-41
 E E Feb 01/98 E E ECES E

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

 (2) On the overhead maintenance panel 50VU, make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off. Make sure that a warning notice is in position to tell persons not to energize the FADEC 1(2).
 Subtask 78-36-41-010-061
 B. Get Access
 (1) Make sure that the fan cowl doors are open: (Ref. TASK 71-13-00-010-040) FOR 1000EM1 437AL, 438AR FOR 1000EM2 447AL, 448AR

 (2) Make sure that the left thrust reverser door is open: (Ref. TASK 78-36-00-010-040) FOR 1000EM1 451AL FOR 1000EM2 461AL

 Subtask 78-36-41-040-057
 C. Make sure that the thrust reverser is unserviceable (Ref. TASK 78-30-00-481-041).
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EXHAUST 2(102)