曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Wear serviceable limits (Ref. Fig. 603/TASK 78-36-41-991-307)
No damage permitted If you find some damage, replace the damaged part. (Ref. TASK 78-36-41-000-044) and (Ref. TASK 78-36-41-400-044)
If you find some damage, replace the centering pin. (Ref. TASK 78-36-41-000-045) and (Ref. TASK 78-36-41-400-045)
If you find a crack, replace the centering pin. (Ref. TASK 78-36-41-000-045) and (Ref. TASK 78-36-41-400-045)
If the wear is more than
 satisfactory limits , replace the centering pin. (Ref. TASK 78-36-41-000-045) and (Ref. TASK 78-36-41-400-045)
If you find some damage, replace the damaged part. (Ref. TASK 78-36-41-000-045) and (Ref. TASK 78-36-41-400-045)
 NOTE : Make sure that the thrust reverser half door latches are adjusted
____ when you replace the latches or the stirrups (Ref. TASK 78-36-41-820-042).
 F 『 EEFF : ALL E Page 60978-36-41
 E E Feb 01/98 E E ECES E NOTE : Apply a witness line of finish paint EA4 blue 5991 (Material No.

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

____ CP2245) on all nuts and connectors after they are torqued.
 5. Close-up
________ Subtask 78-36-41-410-058
 A. Close Access
 (1) Make sure that the work area is clean and clear of tool(s) and other items.

 (2) Close the thrust reverser doors but do not make the thrust reverser serviceable (Ref. TASK 78-36-00-410-040) : FOR 1000EM1 451AL, 452AR FOR 1000EM2 461AL, 462AR

 Subtask 78-36-41-440-055
 B. Make the thrust reverser serviceable (Ref. TASK 78-30-00-081-041). Subtask 78-36-41-410-059
 C. Close Access
 (1) Close the fan cowl doors (Ref. TASK 71-13-00-410-040):
 FOR 1000EM1
 437AL, 438AR
 FOR 1000EM2
 447AL, 448AR

 (2) Remove the warning notice(s).

 F 『 EEFF : ALL E Page 61078-36-41
 E E Feb 01/98 E E ECES E

 F 『
 E C F M E
 E E
 E 56-5B E
 E E
 ADAPTOR - RING ASSEMBLY - REMOVAL/INSTALLATION

______________________________________________
 TASK 78-36-42-000-001
 Removal of the Adapter Ring Assembly
 CAUTION : DO NOT DROP ANY BOLT OR WASHER IN VARIABLE BLEED VALVE AREA. THIS
_______ COULD CAUSE DAMAGE TO ENGINE.
 1. Reason for the Job

__________________
 Self Explanatory

 2. Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific clean cloth No specific plastic scraper No specific warning notice No specific access platform 1 m (3 ft. 3 in.)
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No.  CP1039 
Material No.  CP1041 
R  Material No.  CP2011 
R 
R  Material No.  CP2559 
R 
R  Material No.  CP2560 
R 
R  Material No.  CP2566 
R 
R  Material No.  CP2584 
R 
R  Material No.  CP2656 
F 
EEFF :  ALL 
E 
E 
ECES 

* acetone (Ref. 70-30-00)* isopropyl alcohol (Ref. 70-30-00) * stoddard solvent (Ref. 70-30-00) * ardrox 552 (Ref. 70-30-00) * turco ind 79 (Ref. 70-30-00) * mag-chem teksol (Ref. 70-30-00) * degreasol 99 R (Ref. 70-30-00) *
『
E 78-36-42Page 401
E May 01/05EE -------------------------------------------------------------------------------

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
R mag-chem skysol (Ref. 70-30-00)
 C. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
71-13-00-010-040 Opening of the Fan Cowl Doors 78-30-00-481-041 Make the Thrust Reverser Unserviceable for Maintenance 78-32-11-000-002 Removal of the Left or Right Half Door of Thrust
 Reverser
 78-36-42-991-301 Fig. 401
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EXHAUST 2(109)