曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

R  (11) If necessary, turn the splined fittings (53) clockwise or 
R  counterclockwise, until the dimension 'E' is correct. 
R  (12) Measure the dimension 'F', which must be between 2 mm (0.078 in.) and 
R  6 mm (0.24 in.). 
R  (13) Install the bonding straps (26) and (31) with the bolts (28) and 
R  (32), and the nuts (27) and (29).

 

R  (14) Install the bolts (54) and safety with MISCELLANEOUS (Material No. 
R  19-010) to the splined-fittings (53), then install the push-fit 
R  covers (55). 
R  (15) Remove the bolts (2), (8) and (12), then remove the fixed fairing (1) 
R  and (if installed) the packer(s) (19). 
R  (16) Hold the fixed fairing and install the bonding strap (17), with the 
R  bolt (16) and the nut (15) (Ref. TASK 20-28-00-912-004). 
R  (17) Apply a thin layer of SEALANTS (Material No. 09-018) or SEALANTS 
R  (Material No. 09-019) to: 
R  - the packer(s) (19) 
R  - the bolts (2), (8) and (12) 
R  - the covers (3) and the lower cover (13) 
R  - the screws (4) and (14). 
R  NOTE : Make sure that the threads of the bolts ((2), (8) and (12),____ 
R  and the screws (4) and (14) stay clean. 
R  (18) If necessary, install the packer(s) (19) on the fixed fairing (1). 
R  (19) Install the fixed fairing with the bolts (2), (8) and (12). 
R  (20) TORQUE the bolts (2), (8) and (12) to between 0.65 and 0.75 m.daN 
R  (57.52 and 66.37 lbf.in). 
R  (21) Install the covers (3) with the screws (4). 
R  (22) TORQUE the screws (4) to between 0.17 and 0.23 m.daN (15.04 and 20.35 
R  lbf.in). 
R  (23) Install the lower cover (13) with the screws (14). 
R  (24) TORQUE the screws (14) to between 0.35 and 0.45 m.daN (30.97 and 
R  39.82 lbf.in).

 

R Subtask 57-55-11-420-073

R  C. Installation of the Side Load Stay 
R  WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ 
R  MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. 
R  OBEY THE MANUFACTURERS INSTRUCTIONS. 
R  PUT ON PROTECTIVE CLOTHING. 
R  DO NOT GET THEM IN YOUR MOUTH. 
R  DO NOT SMOKE. 
R  DO NOT BREATHE THE GAS. 
R  THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. 
R  GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED. 
R  (1) Temporarily install the bolt (47), the washer (48) and the nut (49). 
R  (2) Measure and write down the dimension 'X' and the dimension 'Y'. 
R  (3) Subtract dimension 'X' from dimension 'Y' to calculate the 
R  difference. Use the table that follows to calculate the shim 
R  thickness (51). 
R  NOTE : All the dimensions in the table are in millimeters.____

 

R For Flap Track 2 R -------------------------------------------------------------------------------R | Column A | Column B | Column C | R -------------------------------------------------------------------------------R |If the difference| this is the total | Add these quantities of shim type | R |between Dim. 'X' | thickness of the | together, to get the thickness | R |and Dim. 'Y' is | shims necessary to | that is given in Column B. | R |as given below, | get the correct fit. | 0.3 thick | 0.4 thick | 0.5 thick | R -------------------------------------------------------------------------------R | 0.0 to 0.6 | 0.5 | -| -| 1 | R -------------------------------------------------------------------------------R | 0.61 to 0.7 | 0.6 | 2 | -| -| R -------------------------------------------------------------------------------R | 0.71 to 0.8 | 0.7 | 1 | 1 | -| R -------------------------------------------------------------------------------R | 0.81 to 0.9 | 0.8 | -| 2 | -| R -------------------------------------------------------------------------------R | 0.91 to 1.0 | 0.9 | -| 1 | 1 | R -------------------------------------------------------------------------------R | 1.01 to 1.1 | 1.0 | -| -| 2 | R -------------------------------------------------------------------------------R | 1.11 to 1.2 | 1.1 | 2 | -| 1 | R -------------------------------------------------------------------------------R | 1.21 to 1.3 | 1.2 | 1 | 1 | 1 | R -------------------------------------------------------------------------------R | 1.31 to 1.4 | 1.3 | 1 | -| 2 | R -------------------------------------------------------------------------------R | 1.41 to 1.5 | 1.4 | -| 1 | 2 | R -------------------------------------------------------------------------------R | 1.51 to 1.6 | 1.5 | 2 | 1 | 1 | R -------------------------------------------------------------------------------R | 1.61 to 1.7 | 1.6 | 1 | 2 | 1 | R -------------------------------------------------------------------------------
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINGS 機翼5(68)